Hey Jeremy,
I have run into this issue before and the one we found out to work
the best is a Hubbell Part# GFRST20W. Dont know if things have changed since
last but give it a try.
Good luck!
Andrew Perkins
Greenwired
Store Manager/Service Tech
P: 707-923-2001 ext. 100
115
Wrenches
Has anyone confirmed which AFCI, combo GF/ CAFI , or GF only circuit breaker
brand names work with the PAE series inverter?
The leviton combos seems to freak out!
Regards ,
Jeremy Rodriguez
Solar Installation / Design
All Solar, Inc.
1453 M St.
Penrose Colorado 81240
Sent by Jerem
nction. Please notify
the sender immediately by electronic mail of any unintended recipients and
delete the original message without making any copies.
From: RE-wrenches On Behalf Of Ron
Young via RE-wrenches
Sent: Wednesday, July 20, 2022 3:26 PM
To: RE-wrenches
Cc: Ron Young
Subject: Re
One caution, Jeremy. The EVOs that I used are only available in 120V input and
output, and Magnum PAEs are split phase 120/240.
Allan
> On Jul 23, 2022, at 3:34 PM, Jeremy Rodriguez via RE-wrenches
> wrote:
>
> We’ve ordered one to try since we cannot get the PAEs.
> I hope Magnum can resum
We’ve ordered one to try since we cannot get the PAEs.
I hope Magnum can resume shipping orders in the 38 weeks I was told!
Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
1453 M St
Penrose Colorado 81240
Sent by Jeremy's iPhone. Sorry for typos and shorthand.
On Jul 23, 2022
I have installed three of the Samlex EVO series in the last few years,
all 24V units and all with Midnite E-Panels, and all have worked
flawlessly. I've ordered all as preassembled units from Midnite.
Allan
On 7/20/2022 4:34 PM, Bradley Bassett via RE-wrenches wrote:
The Samlex EVO4248SP is a p
The Samlex EVO4248SP is a potential substitute. The only system panel is the
MidNite E-panel. This is a 4.2 kW split phase inverter.
Brad
AEE Solar
Sent from my iPhone
> On Jul 20, 2022, at 1:25 PM, Ron Young via RE-wrenches
> wrote:
>
> I have been waiting literally months for delivery of
I have been waiting literally months for delivery of 4024 and 4448 PAE
inverters both this year and 2021. It seems Magnum has dropped through the
cracks in the floorboards. My supplier, the largest in Canada, has no idea of
future shipments, they just show up without advance notice. I think Magn
Hi Jeremy,
Check with Zonna Energy in PA. I use them for almost all of my off-grid
equipment now and have been very happy with the service and pricing. They
normally stock Magnum equipment but I have not checked on inverters in a while.
Luke Christy
719-588-3044
sgsrenewab...@gmail.com
> On
o: Jeremy Rodriguez via RE-wrenches
Cc: Sindelar Solar
Subject: Re: [RE-wrenches] Magnum Inverters
Jeremy,
I have long and happily used Backwoods Solar, who carries Magnum, but I checked
their website and see that all split-phase Magnums are shown as on backorder.
I work with Erika Karnitz, 541
Jeremy,
I have long and happily used Backwoods Solar, who carries Magnum, but I
checked their website and see that all split-phase Magnums are shown as
on backorder.
I work with Erika Karnitz, 541 482-3439.
Allan
On 7/20/2022 5:29 AM, Jeremy Rodriguez via RE-wrenches wrote:
Does anyone have a
Does anyone have a source these days for Magnum Energy Inverters?
Contact me off list if needed.
Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
1453 M St
Penrose Colorado 81240
Sent by Jeremy's iPhone. Sorry for typos and shorthand.
_
:58 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Magnum Inverters - Digital Clocks Losing Time?
Rich, this is a known flaw in the Magnum AE and PAE series. I have one longtime
client for whom I supplied a 4448AE around 2009 who later told me that had he
known of this frequency issue he wouldn’t
Hi Rich,
This appears to be a newer thing with magnum. I’ve seen this and it’s been
commented previously here on the wrenches. Doesn’t appear to be load or charge
related.
It’s definitely not on the older models.
Magnum says that this voltage fluctuation is normal operation.
Jay
Peltz pow
Rich, this is a known flaw in the Magnum AE and PAE series. I have one longtime
client for whom I supplied a 4448AE around 2009 who later told me that had he
known of this frequency issue he wouldn’t have selected Magnum.
Allan Sindelar
> On Apr 1, 2019, at 6:56 AM, Christopher Warfel
> wrot
I would think it has to be frequency. What else could shift the time?
Up until about 2 years ago we were a grid isolated system and no one
could use a plug in the wall clock. It takes just a very little off 60
Hz for a clock to keep incorrect time. Being off .5 Hz will result in
42,300 cycles
Hello Wrenches
I have a site with two PAE 48v Magnum inverters stacked. System voltage
fluctuates ~ +/- 4 volts ranging from 243 to 247. Evenly split on the two lines.
Site has a few electrical peculiarities I haven’t seen on the many other sites
I have with Magnum inverters. Among those is thr
_
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Matt Tritt
Sent: Monday, August 03, 2009 12:44 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Magnum inverters (not really a power factor
issue)
I'm hoping that it WILL
07-44
Original Message ----
Subject: Re: [RE-wrenches] Magnum inverters (not really a power factor
issue)
From: boB Gudgel
Date: Sun, August 02, 2009 12:53 am
To: RE-wrenches
Darryl Thayer wrote:
The 120 leg to leg, that is strange. Is it possible the Inverter
has
92907-44
Original Message
Subject: Re: [RE-wrenches] Magnum inverters (not really a power factor
issue)
From: boB Gudgel
Date: Sun, August 02, 2009 12:53 am
To: RE-wrenches
Darryl Thayer wrote:
> The 120 leg to leg, that is strange. Is it possible the Inverter has an ou
;When I checked phase to phase I also only got 120"
OK, Matt, that part passed right through me... H (60 Hz
H... too)
boB
--- On Sat, 8/1/09, Matt Tritt wrote:
From: Matt Tritt
Subject: Re: [RE-wrenches] Magnum inverters (not really a power factor issue)
To: "RE-
Matt Tritt wrote:
The next time I'm up there I'll take another tech with me, plenty of
meters and go through every DC and AC connection (they all looked good
first time around) to try and get to the bottom of the problem prior
to taking a harder look at Magnum. I have to say, though, that I hav
Yes Matt it was an SW
--- On Sat, 8/1/09, Matt Tritt wrote:
> From: Matt Tritt
> Subject: Re: [RE-wrenches] Magnum inverters (not really a power factor issue)
> To: "RE-wrenches"
> Date: Saturday, August 1, 2009, 10:51 PM
>
>
>
>
>
>
> Go
:
> From: Matt Tritt
> Subject: Re: [RE-wrenches] Magnum inverters (not really a power factor issue)
> To: "RE-wrenches"
> Date: Saturday, August 1, 2009, 10:43 PM
>
>
>
>
>
>
> The next time I'm up there I'll take another tech
> wi
ou do try
it. Sometimes, higher capacitance can actually make things worse,
like, raising the peak
DC voltage seen at the inverter terminals due to L-C resonance.
boB
--- On Sat, 8/1/09, boB Gudgel wrote:
From: boB Gudgel
Subject: Re: [RE-wrenches] Magnum inverters (not really a
ttery. My grandson has a 1 Farad Capacitor in his sterio
system, perhaps this would fix the problem. BoB what do you think?
Darryl
--- On Sat, 8/1/09, boB Gudgel wrote:
From: boB Gudgel
Subject: Re: [RE-wrenches] Magnum inverters (not really a power factor issue)
To: "RE-wrenches&q
The next time I'm up there I'll take another tech with me, plenty of
meters and go through every DC and AC connection (they all looked good
first time around) to try and get to the bottom of the problem prior to
taking a harder look at Magnum. I have to say, though, that I have heard
a couple o
udgel wrote:
> From: boB Gudgel
> Subject: Re: [RE-wrenches] Magnum inverters (not really a power factor issue)
> To: "RE-wrenches"
> Date: Saturday, August 1, 2009, 9:08 PM
> Darryl Thayer wrote:
> > Don't know if this will help, but an experiance of
> min
g the peak
DC voltage seen at the inverter terminals due to L-C resonance.
boB
--- On Sat, 8/1/09, boB Gudgel wrote:
From: boB Gudgel
Subject: Re: [RE-wrenches] Magnum inverters (not really a power factor issue)
To: "RE-wrenches"
Date: Saturday, August 1, 2009, 6:22 PM
. My grandson has a 1 Farad Capacitor in his sterio
system, perhaps this would fix the problem. BoB what do you think?
Darryl
--- On Sat, 8/1/09, boB Gudgel wrote:
> From: boB Gudgel
> Subject: Re: [RE-wrenches] Magnum inverters (not really a power factor issue)
> To: "RE-wrenches
Larry Crutcher, Starlight Solar wrote:
Hey Matt,
I sure wish their techie's would get to the bottom of it. I am getting
gun-shy about selling Magnum and they are about the best available for
small 12 volt systems. I have spend hours trying to solve the problem.
My customer is still not a happ
Hey Matt,
I sure wish their techie's would get to the bottom of it. I am getting
gun-shy about selling Magnum and they are about the best available for
small 12 volt systems. I have spend hours trying to solve the problem.
My customer is still not a happy camper.
Larry Crutcher
Starlight
32 matches
Mail list logo
