I’d talk to kris Stone, if OB hasn’t been if any help
Jay
> On Oct 28, 2019, at 3:22 PM, toddc...@finestplanet.com wrote:
>
>
> wrenches,
>
> i have a GVFX3648 that is acting weird,
>
> rather then the mate normally showing:
> AC <-> DC which shows the inverter's total power processing,
thanks for the advice ray... this is easily 10 years old.
and while this is off the wall it will get a new internal fan and transformer
temp sensor (that failed 2 years ago).
i will look at the ac board relays when it is open too.
todd
On Monday, October 28, 2019 5:12pm, "Ray" said:
You probably already checked this, but have you made sure the transfer
switch wasn't switched to bypass? Also, you didn't mention the age of
the system. I've seen quite a few Outbacks requiring rebuilds at 9+
years. Usually the control board, but the relays on the AC board can
get cooked, if
thanks for the reply jerry,
nope, no changes...
the first thing i did was to swap mates and saw the same readings. outback
customer support said they thought it was the control board (because ac boards
rarely fail), so i will do that tomorrow... but thought some wrences might have
seen this a
Wrenches and Todd
Have done any software updates or other component changes, have you used
another mate to confirm same condition present. Have you confirmed that the
selling amount is accurate. I have had very little issues with the FX on
general but l have had mates act up.
Jerry
On Mon, Oct 28,
wrenches,
i have a GVFX3648 that is acting weird,
rather then the mate normally showing:
AC <-> DC which shows the inverter's total power processing,
minus "AC load"
equals "Selling"
now the AC <-> DC shows nothing and "AC load" = "Selling" are identical (both
track the same level of lo
6 matches
Mail list logo
