HI All,
I’ve got a client who is set on wanting to do rail less racking. I’m just
working with him on overall design, hes doing the work.
Its not a large system. 16 modules on two roof orientations, ( 4 on one, 12 on
the other) with offset modules. Standing metal seam roof that is being
i
Hi Jay,
It is a big mistake to do this if ground mounting is an option. I do not
believe the engineering over time. Nuff said by me!
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridso...@sti.net
text 209 813 0060
> HI All,
>
> Iâve
ts.re-wrenches.org] On
Behalf Of jay
Sent: Friday, March 30, 2018 4:27 PM
To: RE-wrenches
Subject: [RE-wrenches] rail less standing seam attachments
HI All,
I’ve got a client who is set on wanting to do rail less racking. I’m just
working with him on overall design, hes doing the work.
Its
and wire management . We made the decision that we would never do it
again.
John Blittersdorf
jblittersd...@robstubbinssolar.com
-- Forwarded message -
From: William Miller
Date: Sat, Mar 31, 2018 at 1:37 AM
Subject: Re: [RE-wrenches] rail less standing seam attachments
To: RE
Jay,
Try Rooftech. There are no rails and you don’t need to find the rafters.
They are great for do it yourselfers
David
On Fri, Mar 30, 2018 at 4:26 PM jay wrote:
> HI All,
>
> I’ve got a client who is set on wanting to do rail less racking. I’m
> just working with him on overall design, hes
Jay
Just finished using S5PV railess on standing seam roof 12x12 pitch. Worked
great, but wire management was challenging with minimal clearance under
modules. Had to think ahead to make it work. And still was a struggle. I
also used 6 rather then 4 per module to even out the loads on the roof
Hi Bill;
Not to hijack the thread, but how did you handle fall protection and
work safely on that 12:12 pitch metal roof? I have a steep standing
seam roof project coming up. We wanted to set a ledger board on S5
clips, but were worried they would leave visible damage to the new roof.
Than
Ray,
Standing seam roofs are easier when it comes to fall protection than a
trapezoidal style metal roof which there
are tons of in upstate NY... For a standing seam roof, they make anchors
that will attach to the seam. When the
job is done, they can be removed and reused. We have a few of these:
h
Ray,
I believe S5! offers an approved roof anchor that attaches to standing seams.
A bit pricy (few hundred, I think) especially considering they are one per
person but sometimes that's the cost of safety.
Benn Kilburn
SkyFire Energy
780-906-7807
> On Mar 31, 2018, at 11:19 AM, Ray wrote:
>
-qWaUQFCCJywDd6QSHXmXFEhsaAiBoEALw_wcB
-Glenn
From: RE-wrenches On Behalf Of Benn
Kilburn
Sent: Monday, April 02, 2018 8:24 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] rail less standing seam attachments
Ray,
I believe S5! offers an approved roof anchor that attaches to standing seams.
A bit pricy (few hundred, I
Jay
The S-5 PV kits do work, we have used them on many standing seam roofs, it
does take time to eleminate issues with wiring but it can be a clean roof.
Jerry
On Fri, Mar 30, 2018, 3:03 PM jay wrote:
> HI All,
>
> I’ve got a client who is set on wanting to do rail less racking. I’m
> just wor
11 matches
Mail list logo
