i am trying to connect my eth0 device to my network.
i am getting an error, conflict irq 0 being used...
i am using a compaq deskpro with an installed ethernet
card. when i built the rh6.1 box, it installed the
tlan module fine. how can i change and how do i know
if the irq is a o.k.
__
i have added a new monitor and am having trouble
probing for my video card/monitor. Xconfigurator
tells me i need to enter all the info in. don't know
most of it so that is gonna be a problem. weird thing
is that the probe worked before this new monitor. i
bought a mitsubishi 70 which is on t
here is one more.
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 1
model name : Pentium Pro
stepping: 9
cpu MHz : 199.312119
cache size : 256 KB
fdiv_bug: no
hlt_bug : no
sep_bug : no
f00f_bug:
paul,
as far as cost goes, i was looking into ccvs awhile
ago too and i think it was a little over $1000
dollars.
matt
--- "Paul M. Foster" <[EMAIL PROTECTED]> wrote:
>
> Here's an oddity. Recently, Red Hat purchased Hell's
> Kitchen Systems,
> makers of about the only credit card handling
>
problem. trying to dial out from my rh5.2 box using a
sportster28.8 modem. when i dial, through netcfg, i
get a tone, then no dialing. can't figure it out.
here is messages log-
-
chat[15497]: send (ATZ^M)
chat[15497]: expect (OK)
chat[15497]: ATZ^M^M
chat[15497]: OK
just curious. i am looking at xosview and when i open
an application, memory is taken up which is usual.
now, when i close the app, the memory isn't released.
is this right? don't know too much about memory and
linux. if someone knows how to flush the memory or
even if i need to, let me know
i re-booted. that should do it, shouldn't it?
--- "Mikkel L. Ellertson" <[EMAIL PROTECTED]> wrote:
> At 01:55 PM 3/23/00 -0800, you wrote:
> >
> >i added 128mb of memory to my machine and rh6.1
> does
> >not see it. i opened up the box, added the memory,
> >configured bios to see it, saved, re
i added 128mb of memory to my machine and rh6.1 does
not see it. i opened up the box, added the memory,
configured bios to see it, saved, rebooted. the
machine counts all the way to 161mb. i added the
append statement to lilo.conf. i boot up, look at
/proc/meminfo, and only 61mb are seen. wh
anyone got an example of using wmget through a
firewall. looked at the man and did not see any
authentication options.
matt
__
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
--
To unsubscribe: mail [EMAIL
anyone had any luck with remind. trying to run and
output isn't outputting. i create my MSG statement
and it is not outputting to standard output. anyone
out there use remind, maybe give me a couple simple
pointers.
matt
__
Do You Yahoo!?
Talk
i have installed apache secure server via rpm version
1.3.9. i am trying to use virtual servers and am
having a problem hitting the two sites. i am not
trying to encrypt both sites, just one. here is my
httpd.conf.
#my box inside my firewall
NameVirtualHost 192.168.2.14
#
ServerAlias my
i have two domain names registerd for my one ip. i am
trying to allow mail for both of them. one domain is
allowing mail through, the other is not. i did enter
the name in the mailertable-
myotherdomain.comRELAY:[inside box name]
now, the "inside box name" is in my hosts file so i
f
howdy,
i am trying to alter my firewall to not allow ip
spoofing. i have read the man pages on ipchains and
there is a small script to run on boot before any
network devices are initialized. which file would i
insert into, i don't figure that would be rc.local.
would it be rc.sysint? i am ru
anyone know where in apache, i can configure for a
different image directory. i have an image dir off of
cgi-bin that holds images. when i try to open a gif
based on that dir, it doesn't come up. i looked in
httpd.conf but did not find anything.
_
something broke bad for me while re-compiling my
kernel for smp. i did a make menuconfig, make dep,
make clean, make zImage. i copied the kernel to
/boot, backed up the old kernel(changed name to .old),
and changed the name of the new kernel. now when i
boot, it hangs. i tried rescue disk and
loaded rh6.1 and also came with an rpm, intershop.
looked for man pages for it, nothing. anybody know
where the doc's are located for this or where i can
get them.
matt
__
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http:/
silly question. how can i tell if my system
recognizes the second processor i just installed.
dual pentium pro machine. i looked at dmesg, no
notation. i also looked at /proc/cpuinfo with nothing
really saying there are two processors seen. i guess
i don't really know what i should be looki
i downloaded ippl, basically logs all tcp, udp
connections. looking at the log today i see this
entry-
Jan 29 12:25:48 domain connection attempt from
[EMAIL PROTECTED] [216.0.222.7]
(216.0.222.7:4749->my-ip-address:53)
Jan 29 12:33:41 port 113 connection attempt from
ns.pfsfhq.com [216.0.222.7]
Walters [SMTP:[EMAIL PROTECTED]]
> > Sent: Friday, January 28, 2000 4:20 PM
> > To: [EMAIL PROTECTED]
> > Subject:Re: expn and vrfy
> >
> > what do these options do?
> >
> > On Fri, 28 Jan 2000, matt boex wrote:
> >
> > =>Date: F
how do i shut of the expn and vrfy options on
sendmail. i looked for it on www.sendmail.org but
their security links throw you to cert.
matt
__
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
--
To unsubscr
just got dsl, running pumpd to download my ip from the
modem. i activate the eth1 device by hand, not
startup, cause it will lock my machine.
i usually activate through control-panel. after i do,
it locks the window up. now, after i activate, i do
get my ip because dsl works.
another wei
sent this a couple of times. hope someone knows
something about this.
i recently installed an adaptec scsi controller, and a
yamaha cd-rw on my rh5.2 box. i was putting on a
fresh install, all was found by the install program.
i installed and ran xcdroast and was able to burn a cd
no problem.
howdy,
i am trying to close the last few holes in my
firewall. here is my report after i run a port scan
against it-
PortState Protocol Service Owner
22 opentcpssh
25 opentcpsmtp
111 opentcp
worked fine. thanks steve.
matt
--- Steve Dixon <[EMAIL PROTECTED]> wrote:
> add /usr/local/lib to /etc/ld.so.conf and then run
> ldconfig. then try
> again.
>
> matt boex wrote:
> >
> > i am getting this error when i try to start window
> > maker.
&
i am getting this error when i try to start window
maker.
wmaker: error in loading shared libraries:
libwraster.so.1: cannot open shared o
bject file: No such file or directory
weird thing, i do a locate and find that file in two
places.
/usr/local/lib/ and
/root/Windowmaker-0.61.1/wrlibs/.li
i am running rh6.1 and using pumpd to obtain my ip
from my dsl modem. when i activate the ethernet
device, i get the ip, but it hangs ifconfig. why is
this and where exactly is the ip stored?
__
Do You Yahoo!?
Talk to your friends online with Yaho
i have two questions. first- how do i set up a secure
web page? i want someone to click on a link to a page
with a fill out form but i want that page to be
secure.
second- i have posted this question several times to
no avail. i am having a problem wiht my cd-rw. i run
xcdroast and this er
i just installed mod_ssl to apache. i have been able
to bring up a page using https://myserver/index.html.
when the page comes up, i am prompted about the
certificate. is there a way to bypass the multiple
questions and just push the certificate?
__
i installed my cd-rw on my rh5.2 box and am having
problems with xcdroast. question- if i can mount the
device, sr0, and see the contents do i have a module
problem?
matt
__
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://
i just installed a cd-rw and have burned a cd with no
problem. i open xcdroast and receive this error now.
--
kernel: (scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec,
offset 15.
kernel: hdb: media changed
kernel: hdb: media changed
modprobe: can't locate module block-major-22
modpro
howdy,
i am having a problem with xcdroast. try to run and i
get this error in /var/log/messages-
kernel: (scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec,
offset 15.
kernel: hdb: media changed
kernel: hdb: media changed
modprobe: can't locate module block-major-22
modprobe: can't locate module blo
trying to fire up xcdroast and am receiving this error
in /var/log/messages
kernel: (scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec,
offset 15.
kernel: hdb: media changed
kernel: hdb: media changed
modprobe: can't locate module block-major-22
modprobe: can't locate module block-major-22
modprobe: ca
just installed my yamaha cd-rw. everything worked
fine, i burned a data cd no problem. next time i turn
the machine on, i try to delete a cd and xcdroast says
there is no cd in the tray. i look in
/var/log/messages and it says the "tray is open or..."
(don't have the exact error but will send)
howdy all,
my telnet keep timing out after about 5 minutes. how
can i stop this from happening.
matt
__
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://messenger.yahoo.com
--
To unsubscribe: mail [EMAIL PROTECTED] with
i just purchased a yamaha ymf724f-v soundcard, adaptec
scsi card, and yamaha cd-rw. i also got a new ibm
dual processor box that i am gonna plop rh5.2 on and
use as my web server and more.
question. does anyone have any expierence configuring
these devices(things to read, place to search for
how can i stop my telnet's from timing out?
matt
__
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://messenger.yahoo.com
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
question. how do i change the timeout on my xterm's.
i am telneting to a machine and my xterm's are timing
out in 2-3 minutes. is this an environment varible?
matt.
__
Do You Yahoo!?
Thousands of Stores. Millions of Products. All in one place.
235.1
GATEWAYDEV=tr0
i know, too much information. any help would be
great.
matt boex
__
Do You Yahoo!?
Thousands of Stores. Millions of Products. All in one place.
Yahoo! Shopping: http://shopping.yahoo.com
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
i will be getting dsl in the next few
weeks(hopefully). i need to configure my rh6.1 box's
usb port for the company provided modem. does anyone
out there have a good place to read up on configuring
usb for dsl or just configuring dsl?
matt
can anyone point me in a direction regarding credit
card transaction sofware/hardware for my rh6.1 box
using apache.
=
__
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsu
thank's hidong, i will try it.
matt
--- Hidong Kim <[EMAIL PROTECTED]> wrote:
> matt boex wrote:
> >
> > i just installed rh6.1 and am having trouble
> > increasing the depth on my X desktop. i have
> tried
> > altering XF86Config depth entries with no
i just installed rh6.1 and am having trouble
increasing the depth on my X desktop. i have tried
altering XF86Config depth entries with no joy. problem
is my monitor was not on the list of monitors when
installing. i just selected generic. is there a way
i can re-install just the monitor withou
42 matches
Mail list logo