OK. I know this has been batted around before but
I can't go looking through the archives right
now. Does anybody know how to get the second eth1
NIC configured if it is identical to eth0? I have
tried all day and am not getting anywhere. I have
set up the modules.conf as such for the two
** Reply to message from Vidiot [EMAIL PROTECTED] on Mon, 5 Feb 2001 00:58:57
-0600 (CST)
OK. I know this has been batted around before but
I can't go looking through the archives right
now. Does anybody know how to get the second eth1
NIC configured if it is identical to eth0? I have
Jack Bowling responded:
Ummm...yes, I did. And it gives me the "Delaying eth1 initialization." output when
activated from netcfg. Could be wonky PNP capability in the BIOS. I note that the
onboard chipset of the failing card is an ADMtek AL985 Centaur-P rather than a
Lite-On PNIC-II of my
I had a similar problem when working with my linksys
nic. The only solution I found was to buy another
linksys of the same model and version. It was very
unfriendly with my other tulip cards.
Drew
--- Jack Bowling [EMAIL PROTECTED] wrote:
** Reply to message from Vidiot
[EMAIL PROTECTED] on
OK. I know this has been batted around before but I can't go looking through the
archives right now. Does anybody know how to get the second eth1 NIC configured if it
is identical to eth0? I have tried all day and am not getting anywhere. I have set up
the modules.conf as such for the two
bet
tulip cards should do the same.
Eddie Strohmier
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
Jack Bowling
Sent: Monday, February 05, 2001 1:26 AM
To: [EMAIL PROTECTED]
Subject: configuring identical NICs
OK. I know this has been batted
