> I am looking for a signal sampler. Power handling needs to be at least
> 150W, frequency range 50MHz to 500MHz. Any suggestion where I could buy
> one for <$100 or how I could build one myself?
Thank you for all the suggestions. I will disassemble a tee and isolate
one port. Since I don't need
--- In Repeater-Builder@yahoogroups.com, "k0jxi" <[EMAIL PROTECTED]>
wrote:
"Can anyone tell me the gereric number of the EPROMs used in the non
pc programmable version of the MSF5000
I have heard that you muse have exacty the right type or they will
not work.
Thanks, Dale"
___
the installation of a single UHF repeater run on solar
> power at the site next summer. As such, I need the least amount of
> current drain on the receive radio as possible. I intend to run an
ARR
> GaAsFET (20ma), and a small repeater maker/controller (also 20 ma).
Additionally, if anyone has e
Can anyone tell me the gereric number of the EPROMs used in the non pc
programmable version of the MSF5000
I have heard that you muse have exacty the right type or they will not work.
Thanks, Dale
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
The CLB series MSF will work with either 2732 or 2732A eproms.
E-mail me direct if you need more info.
73's
Andy
--
NC Certified Firefighter III / Instructor II / EMT-A
FCC Licensed Technician / Amateur Call NC4AB
http://www.brinkleyel
Does anyone out there have a manual for the IFR 1200S they can part with
(for money of course), or in the alternative, is anyone willing to make
me a copy of the operations portion of the manual.
All suggestions appreciated.
Army Curtis, AE5P
Nacogdoches, the oldest town in Texas
Your u
One last hint.
The people who make the Unidapt series of adapters make a capacitive tee
that uses the Unidapt adapters for the through connectors, and a nice
slide clamp coupling unit to a BNC that makes it easy to change your
injection level. All the way in, it'll ALMOST touch the center
condu
7 matches
Mail list logo