[Repeater-Builder] tait t2010

hi guys I have a small query .I have a tait t2010 as a transmitter in a repeater and on the bench it produces 25 up watt but when it is hooked up either through a duplexer or direct to a antenna (antenna agencies bu6 tunned to freq,cable- 15meters of LMR400 and a swr of 1.5 to 1) my mobile revex

[Repeater-Builder] Mobex Ritron

I bought a UHF radio for a linking project. Attached to it is a small mobile radio sized unit that says Mobex Ritron on it. It has a VHF antenna connector on the back, an on/off switch, a TX light, a 5 pin mike jack, and a 5 pin mike plug on a wire exiting from the from front. It looks crystal con

Re: [Repeater-Builder] Mobex Ritron

the mobex was like the motorola pac/rt. ritron stopped making the thing years ago. try wallace communications in xenia OH for manual or poop mdmMichal Smialowski <[EMAIL PROTECTED]> wrote: I bought a UHF radio for a linking project. Attached to it is a small mobileradio sized unit that says Mobe

[Repeater-Builder] Mitrek Question Controler

I have a Motorola Mitrek Mobile that conv to a full duplex repeater,I need information as to what a good controler and the one that easy to wire up for a newbeePlease Reply to [EMAIL PROTECTED] Bob/N2BR Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups

[Repeater-Builder] RAMSEY BOARDS fo 2 m and 220.

Has anyone used the Ramsey kits tyo build a repeater? I noticed that there is a "COR" point and "PTT" points on the boards. Ed kb8qeu Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, sen

[Repeater-Builder] DB-224 Tower Side Mounting

Has any one solved the problem of omni directional pattern distortion when side mounting a DB-224 on a tower ?   I've side mounted several DB-224's using the DB 5001 side mount kit.     The results agreed with the radiation pattern supplied by Decibel Products, i.e. a distortion of the omn

RE: [Repeater-Builder] DB-224 Tower Side Mounting

Tower distortion is always an issue when side mounting on a tower, the larger the tower face the larger the distortion to the pattern. Yes mounting at greater distances off the tower will effect pattern / reduce distortion from tower, but increase the mechanical torque the mount and anten

Re: [Repeater-Builder] Mitrek Question Controler

At 12:13 PM 8/16/04, you wrote: >I have a Motorola Mitrek Mobile that conv to a full duplex >repeater,I need information as to what a good controler and >the one that easy to wire up for a newbeePlease Reply >to [EMAIL PROTECTED] > >Bob/N2BR All of the controllers connect to the radios pretty

Re: [Repeater-Builder] Mitrek Question Controler

Try this site: http://www.ah6le.net/arcom/index.html Neil - WA6KLA Bob wrote: > > I have a Motorola Mitrek Mobile that conv to a full duplex > repeater,I need information as to what a good controler and the one > that easy to wire up for a newbeePlease Reply to [EMAIL PROTECTED] >

[Repeater-Builder] GARAGE SALE - Notice or Reminder Aug-21

Dear friends,   This is either a friendly reminder or a sneaky  notification that we are holding once again our semi-semi-semi - annual GARAGE SALE - Saturday AUGUST 21 2004 - 0800-1600 We will have tons of stuph available for sale cheap. Early birds can expect our world famous donut hole and

RE: [Repeater-Builder] Need Hardline connectors!

Title: Message If it's really "625" (0.625" unjacketed, about 0.7" jacketed) 75 ohm aluminum smooth-wall "semiflex" cable TV distribution cable that you have, you want a BAFF connector which will give you type F female.  Check with Toner Cable (www.tonercable.com), North American Cable (w

[Repeater-Builder] Need Hardline connectors!

I need two connectors for 5/8-inch hardline. I would prefer BNC or "F" connectors for termination. (Will settle for anything) I have over 350 ft of excess cable that I will trade for connectors, if anyone is interested. The cable jacket says "1994 Commscope" on it. I am hoping for someone

Re: [Repeater-Builder] RAMSEY BOARDS fo 2 m and 220.

Mr. Edgar McKinney wrote: >Has anyone used the Ramsey kits tyo build a repeater? > >I noticed that there is a "COR" point and "PTT" points on the boards. > >Ed >kb8qeu > I'm not normally compelled to reply to a query such as this one, but please don't consider building a repeater from Ramsey kit

Re: [Repeater-Builder] DB-224 Tower Side Mounting

We have done this many times with good to fair luck. We use a five 5' bracket and point all for dipoles at the tower. Does not work bad. Real close to omni. 73 Russ, W3CH   - Original Message - From: Joel Mele To: Repeater-Builder@yahoogroups.com Sent: Monday, Au

Re: [Repeater-Builder] DB-224 Tower Side Mounting

Joel Mele wrote: Has any one solved the problem of omni directional pattern distortion when side mounting a DB-224 on a tower ? Have you tried all bays in one direction facing directly into the tower? Kevin Custer Yahoo! Groups Links To visit your group on the we

Re: [Repeater-Builder] Need Hardline connectors!

John Clark wrote: I need two connectors for 5/8-inch hardline. I would prefer BNC or "F" connectors for termination. (Will settle for anything) I have over 350 ft of excess cable that I will trade for connectors, if anyone is interested. The cable jacket says "1994 Commscope"

Re: [Repeater-Builder]

Kevin Bednar wrote: >Has anyone used any commercial HT's as a TX driver for a repeater? > Yes: Kevin Custer Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe

[Repeater-Builder] Best Power FerrUPS problem

This is related in that the Best Power FerrUPS FE 1.4 KVA, powers the computer that operates my linking system. Has anyone repaired a UPS of this brand? After exausting it's battery, (several hours after the power went out in Orlando)and shutting it's self down. At that time it seemed to have w