Well, memory was incorrect. Radio Shack does not
have anything that close. They have 1K CT to 8 ohm and another 1:1 for 600-900
ohms.
As far as being a purist, I was assuming that it
was already tried and didn't work well.
Chuck
WB2EDV
- Original Message -
From:
You guys are all purists. Hook it up and see
if it works.
de WD7F
John in Tucson
- Original Message -
From:
Chuck Kelsey
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, December 12, 2004 4:47
PM
Subject: Re: [Repeater-Builder] 600 - 10k
ohm Interfac
I believe Radio Shack sells a matching transformer
that will work.
Chuck
WB2EDV
- Original Message -
From:
Kevin &
Natalia
To: Repeaters Users Group ; Repeater Builder Users
Group
Sent: Sunday, December 12, 2004 6:14
PM
Subject: [Repeater-Builder] 60
--- Kevin & Natalia <[EMAIL PROTECTED]> wrote:
> Hi All,
>
> I need a simple interface for a 600 ohm output radio
> to a controller which accepts 10k ohm.
> This is a RX not TX.
>
> I don't want to make a circuit board if I don't need
> to.
>
> Any ideas?
>
>
Just hang a resistor of about 60
Simplest way is with a standart 600 to 10k transformer.
Kevin & Natalia wrote:
> Hi All,
>
> I need a simple interface for a 600 ohm output radio to a controller
> which accepts 10k ohm.
> This is a RX not TX.
>
> I don't want to make a circuit board if I don't need to.
>
> Any ideas?
>
Hi All,
I need a simple interface for a 600 ohm output radio to a controller which
accepts 10k ohm.
This is a RX not TX.
I don't want to make a circuit board if I don't need to.
Any ideas?
Regards
Kevin.
Yahoo! Groups Links
To visit your group on the web, go to:http
Anyone familiar with this old controller? I need to press it into
service and change callsign and ect. I downloaded the pdf files already.
Thanks in advance and Seasons Greetings,73,Lee,N3APP
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group
Can anyone tell me a good point inside of the Uniden IMU250K radio
where to obtain a good audio output for the controller other than
the speaker output? Thanks.
Mathew
W9MWQ
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Bu
Remember GE did change names a few times since the Mastr II and Delta lines
were introduced.
-Original Message-
From: russ [mailto:[EMAIL PROTECTED]
Sent: Sunday, December 12, 2004 13:20
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] MASTR II mobile conversion questi
Does anyone know of a site that has a good collection of repeater
related audio files. Preferebly courtesy tones and general
announcement. Thanks.
Mathew
W9MWQ
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To
Celwave was bought by RFS. I will send you the tuning info I have on the
5042-1 direct.
73 Russ, W3CH
- Original Message -
From: "milguy111" <[EMAIL PROTECTED]>
To:
Sent: Saturday, December 11, 2004 5:12 PM
Subject: [Repeater-Builder] celwave 5042-1
>
>
>
> anyone have a PDF of the tu
I mite be wrong. Where did you look it up at? I have the list from the FCC I
just got it about 3 months back and there are no GE's on it (GMRS Part 95)
It is about 600 pages long and no GE.
73 Russ,
Ham, W3CH.
GMRS, WPYK-254.
- Original Message -
From: "Kevin King" <[EMAIL PROTECTED]>
To
Hi Rob,
Helper is now owned by Zetron. They were happy to
sell me a Service Manual last year. Zetron's support
for Helper seems to be very good. I can't say the
same for Zetron supporting their own stuff. Try
buying a manual for some of their paging equipment
over 5 to 8 years old.
Goo
Hello to the list. I know this topic has come up over and over before,
but, I have a question. I have a Stationmaster type antenna that I
want to retune. I am trying WD8CHL's mod. I have put three pieces
of aluminum foil on and it has not changed the SWR reading from
the first piece I put on.
I know this is a bit off-topic, but, the service manuals for these
little things are pretty tough to find.
I'm happy to pay any shipping/copying or whatever?
Thanks,
Rob
W2IO
Erie, CO
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/gro
not true russ. Deltas are look it up.
Kevin King SCSA BSCIS
ARS KC6OVD
GMRS KAG0378
EIEIO 2722
Acworth Georgia
-Original Message-
From: russ [mailto:[EMAIL PROTECTED]
Sent: Saturday, December 11, 2004 2:12 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] MASTR II
Heard the Plastic Saturn has a vechicle is metal now, after seeing a heap
of plastic crap on the County Road pushed by a shovel totally toast didn't
take the road crew to shovel it up and toss in the rear of a standard box
dump truck! wish I had my digital camera to share the pile of junk !!
Hello Group,
Does anyone know what type of AC adapter is used with
the rapid charging dock or the standard charger dock
used to charge the Radius P50 HT?
I have both charging docks and can't find the AC
transformer for either...:(
Regards, Barry
___
hi, to all group
can anyone tell me which could be the best measure
for my group of cables for adjusting vhf and uhf repeater duplexers in my
laboratory?
i use rg142/u cable, but i would like to know the
best measure for them.(unique long maibe)
actualy i have a mix of long and short cable
19 matches
Mail list logo
