Re: [Repeater-Builder] Source for Moto T1504 duplexer locking nuts?

At 12:59 PM 2/15/05, you wrote: I have a Motorola T1504 duplexer in need of 4 locking nuts. The locking nut part number is 2-10397A06, but a call to Motorola parts indicates the part number isn't on file. Does anyone have any recommendations for a substitute part, and do they know what the

Re: [Repeater-Builder] Motorola Voting Controller???

Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/

Re: [Repeater-Builder] Motorola Voting Controller???

What model is it and how many channels does it have. Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo!

Re: [Repeater-Builder] Hustler G-7 220 Ant

Hello Don, I use Ideal No-Ox on all slip joints and ALL screws. It is available from most electrical supply outlets or Home Depot. It is a gray gooey compound. You must mix the contents before use. There is a clear liquid and I believe the gray stuff is zinc. I do not use the green stuff

Re: [Repeater-Builder] Hustler G-7 220 Ant

Here is my recent reassembly anticorrosion treatment (and a bit more) of a failed by corrosion G7-144. After I did the prescribed tune-up, I marked the slip joint lengths and then I took the them apart and scratched up the mating aluminum and reassembled each of the slip joints with an

Re: Re: [Repeater-Builder] Source for Moto T1504 duplexer locking nuts?

Jack, Thanks for the info. Mike (ILQ) - Maybe add this to the duplexer page on repeater builder? 94830A550 Cadmium-Plated Stl Hex Thin Flex-Top Locknut 1/2-20 Screw Size, 3/4 Width, 21/64 Height In stock at $10.91 per Pack This

Re: Re: [Repeater-Builder] Source for Moto T1504 duplexer locking nuts?

At 09:02 AM 2/16/05, you wrote: Jack, Thanks for the info. Agreed ! Thanks for looking that up and posting it. Mike (ILQ) - Maybe add this to the duplexer page on repeater builder? 94830A550 Cadmium-Plated Stl Hex Thin Flex-Top Locknut 1/2-20 Screw Size, 3/4

RE: [Repeater-Builder] Source for Moto T1504 duplexer locking nuts?

The ones I used were from TSC and cost about $1.29Lb. They are standard 1/2 x 20 nuts because you really don't need JAM nuts. Kenneth P. Cook Jr., W8DZN President, Bucyrus Amateur Radio Club Assistant Emergency Coordinator for Crawford Marion Co., Ohio Winlink 2000 Representative for District 6

[Repeater-Builder] 7k Hidden Words Revisited

Hi All! For the life of me I cant seem to find my file of the "hidden words" Any one have a copy words they can post? Thanks all, Brian, WD9HSY Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from

RE: [Repeater-Builder] 7k Hidden Words Revisited

Hidden words? H... if your controller speaks hidden words, does anyone hear them? :-) Ken (sorry, couldn't resist) -- President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and

Re: [Repeater-Builder] 7k Hidden Words Revisited

Would anyone care? See you Saturday Ken, Neil Ken Arck wrote: Hidden words? H... if your controller speaks hidden words, does anyone hear them? :-) Ken (sorry, couldn't resist) President and CTO - Arcom

Re: [Repeater-Builder] Duplexer

Reuben, To what frequencies is this duplexer currently tuned? 73, Eric Lemmon WB6FLY Reuben Meeks wrote: I have a Decibel Products, DB4048, Duplexer in mint condition for sale. The frequency range is 146 to 174 MHz., in a weather proof cabinet. I was going to build a 2-meter repeater