The ones I used were from TSC and cost about $1.29Lb. They are standard 1/2 x 20 nuts because you really don't need JAM nuts.
Kenneth P. Cook Jr., W8DZN President, Bucyrus Amateur Radio Club Assistant Emergency Coordinator for Crawford & Marion Co., Ohio Winlink 2000 Representative for District 6 ARRL VE, ARRL Registered, Certified Instructor/Examiner for ECOMM Levels I, II and III. -----Original Message----- From: Jack Davis [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 16, 2005 10:50 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Source for Moto T1504 duplexer locking nuts? 94830A550 Cadmium-Plated Stl Hex Thin Flex-Top Locknut 1/2"-20 Screw Size, 3/4" Width, 21/64" Height In stock at $10.91 per Pack This item is only sold in Packs of 10 Packs of 10 http://www.mcmaster.com/ Here you go! Jack K6YC ----- Original Message ----- From: "mch" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Wednesday, February 16, 2005 1:17 AM Subject: Re: [Repeater-Builder] Source for Moto T1504 duplexer locking nuts? > > Well, this will give you the specs on it. It subs to another number, and > that other part is NLA, but the description is still there. > _______________________________________________ > Item number. 0210397A06 * The item 0210397A06 has been replaced > with 0210348A05. Selecting this > item will add 0210348A05 to your cart. > 0210348A05: Item has been cancelled > > NUTLCK 1/2-20X5/16 HEX STL CAD > Unit of Measure: 3 PK > _______________________________________________ > > Joe M. > > Mike Morris WA6ILQ wrote: >> >> At 12:59 PM 2/15/05, you wrote: >> >> >I have a Motorola T1504 duplexer in need of 4 locking nuts. The locking >> >nut part number is 2-10397A06, but a call to Motorola parts indicates >> >the >> >part number isn't on file. Does anyone have any recommendations for a >> >substitute part, and do they know what the nut size and thread pitch are >> >for the locking nut? >> > >> >Steve >> >WA6ZFT >> >> As I understand from a friend they've been NLA for a few years. >> >> I need 6 or so and am almost ready to call in a >> favor and have a friend make some on a lathe, >> starting with hex stock. >> >> Mike >> >> >> Yahoo! Groups Links >> >> >> >> > > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/