Re: [Repeater-Builder] COS for GE Phoenix -SX

Here is how I connect up the GE Phoenix radios. J903 7 filtered vol/sql high (rolls off 300Hz and down to drop PL) also muted 3 vol/sql high (discrimator) 4 RX mute (6.3v squelch open and follows PL programmed) J912 3 CAS (4.0 open squelch follows carrier) a) I jump HL105 to U704 pin 13. Th

Re: [Repeater-Builder] COS for GE Phoenix -SX

you can find the information that you are looking for at this site http://www.rtzaudio.com/kg4lne/phoenix.asp Va3kmc Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to:

[Repeater-Builder] COS for GE Phoenix -SX

Does anyone know if and where you can get an active COS signal on a GE Phoenix-SX mobile radio? Thanks J Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAI

RE: [Repeater-Builder] GE FOR SALE

I think so also, I think everyone jumped to contusions (lame pun intended) without reading the complete post. I think it may be a little high, not real familiar with all of the equipment but I don't think he deserved the hate emails. It's a good starting point. Someone may need all that stuff a

Re: [Repeater-Builder] GE FOR SALE

In all fairness,there is a lot more there than the repeaters. Sounds like he's selling it all off... JOHN MACKEY wrote: >Is it made of pure gold? > >-- Original Message -- >Received: Sun, 27 Feb 2005 09:15:44 AM CST >From: "Tommie Taylor" <[EMAIL PROTECTED]> >To: Repeater-Builder@yahoog

[Repeater-Builder] wanted: a couple of things

i need a high Q VHF pass/notch cavity, prefer Db or Tx/Rx i am looking for manuals for MSF 5000 repeaters - i need a VHF and a UHF one. must be for the digital / secure capable version (not analog) - and i prefer the thick one - not the thin instruction manual. if you have the above, let me k

Re: [Repeater-Builder] OT- Cushman CE5

My CE-5 has the same problem. I am thinking about how way back in my early TV servicing days, some televisions used an oscilloscope type CRT - used deflection plates for the internal sweep instead of the later used external magnetic deflection circuitry. Those older TV's, as I v

Re: [Repeater-Builder] Digest Number 2996

I have a J3RP1 tube,NIB. Contact direct if interested...res0s7nd"at"verizon"dot"net Mike Morris WA6ILQ wrote: >At 04:21 PM 2/27/05, you wrote: > > > >>Been there - Done that - Still putting the $&#**^% plug-in back together! >>BTW - the Cushman manual is SOO wrong. >> >>The CRT is actuall

Re: [Repeater-Builder] Digest Number 2996

At 04:21 PM 2/27/05, you wrote: >Been there - Done that - Still putting the $&#**^% plug-in back together! >BTW - the Cushman manual is SOO wrong. > >The CRT is actually a 3RP1A (flat screen) and you "could" pay >$160 for a "NOS" one on ePay >or you could go to: > http://www.vacuumtub

[Repeater-Builder] Re: FS: Micor Compa-Station Repeater

--- In Repeater-Builder@yahoogroups.com, "wn1b8" <[EMAIL PROTECTED]> wrote: > > I have for sale a Micor Compa-Station Non-Unified repeater (less > cabinet) that includes the following items: > > TLD1683C Transmitter (110W Intermittent Duty) > TRD1803BB Receiver currently on 155.28 MHz. > TRD18

Re: [Repeater-Builder] Cetec Vega question

All I have is the 221 board and the board that it connects to, all in the factory metal box. It has connecters for the GE Phoenix SX radio. There is a place where another board could connect to and the side holders for that board. Would that be the 510N board slides in at? Or is the 510N board

Re: [Repeater-Builder] Digest Number 2996

Been there - Done that - Still putting the $&#**^% plug-in back together! BTW - the Cushman manual is SOO wrong. The CRT is actually a 3RP1A (flat screen) and you "could" pay $160 for a "NOS" one on ePay or you could go to: http://www.vacuumtubes.net/ and get a brandie new (Chinese)

[Repeater-Builder] Micro Plexer Duplexer

Looking for information about the Swiveter Micro Plexer Duplexer. Any information out there? Thank you. Rod Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL

Re: [Repeater-Builder] Cetec Vega question

Hello Rod: I am looking at the 221 Series Tone remote control panel pc board manual and it matches what you describe, K1 left front, LED on the left rear DS1. this is the 2175 decoder card. BTW this 221 series was available in three models. You need the Model 510N tone remote control console (

[Repeater-Builder] Wanted Kenwood TK-840

I looking for some UHF Kenwood TK-840-1 Radios and possible couple VHF Kenwoods,Dont need mic's just as long as they work good and i care about scrach marksBob/N2BR [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/grou

RE: [Repeater-Builder] GE Master II

100wt stations in good condition NO more than 275ea Oregon Repeater Linking Group Mike Mullarkey -Original Message- From: va6ef [mailto:[EMAIL PROTECTED] Sent: Sunday, February 27, 2005 12:33 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] GE Master II Hell

Re: [Repeater-Builder] Re: Cetec Vega question

Hello Skipp: The 221 and 222 Series was replaced by the 223 series about 12/87. This new series replaced most of the new Motorola base stations tone remotes, also GE type base stations. Please give me the model of your tone remote, maybe a RC-223, RC-223-2, etc. I will send you a manual to

Re: [Repeater-Builder] OT- Cushman CE5

At 09:48 PM 2/27/2005 -, you wrote: >The CRT display in my old CE5 has gotten so dim that I have to turn >the lights off to use it. Does anyone know the CRT tube number used in >it so I can start looking for one? (It is much easier asking than >taking it apart and looking !!) <---I'd check t

[Repeater-Builder] maxon sd174 data radios.

would anyone know how to wire 2 maxon sd174 data radios together as a link repeater Thank youIan WellsKerinvale Comaudiomail service 1017,Biloela,4715.www.kerinvalecomaudio.com.au Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-

[Repeater-Builder] OT- Cushman CE5

The CRT display in my old CE5 has gotten so dim that I have to turn the lights off to use it. Does anyone know the CRT tube number used in it so I can start looking for one? (It is much easier asking than taking it apart and looking !!) Yahoo! Groups Links <*> To visit your group on th

Re: [Repeater-Builder] GE Master II

For two set up, that's a pretty good price (for true repeaters, not converted mobiles). Joe M. va6ef wrote: > > I am looking at buying a pair of GE Master II UHF repeaters and > I am wondering if anyone could give me a ballpark figure as to there > worth .. they are asking 600 bucks for th

[Repeater-Builder] GE Master II

Hello I am looking at buying a pair of GE Master II UHF repeaters and I am wondering if anyone could give me a ballpark figure as to there worth .. they are asking 600 bucks for the pair including a 30 Amp ps and the rocks at my required frequency .. Is this fair bad or indifferent

Re: [Repeater-Builder] GE FOR SALE

Must be ... I got one a year ago or so for $25 at St. Vincent de Paul. Neil - WA6KLA JOHN MACKEY wrote: > > Is it made of pure gold? > > -- Original Message -- > Received: Sun, 27 Feb 2005 09:15:44 AM CST > From: "Tommie Taylor" <[EMAIL PROTECTED]> > To: Repeater-Builder@ya

Re: [Repeater-Builder] GE FOR SALE

Is it made of pure gold? -- Original Message -- Received: Sun, 27 Feb 2005 09:15:44 AM CST From: "Tommie Taylor" <[EMAIL PROTECTED]> To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] GE FOR SALE > > > FOR SALE > > > > 2 Ge Master II Continuous Duty Repeaters (COMPLE

[Repeater-Builder] Whiskers growing in the helical resonator casting.

With the addition of a great picture of whiskers growing in a GE Mastr II casting, I have updated the webpage devoted to this subject: Thanks goes out to Tracy Hooker KA5ECS for providing the picture. Kevin Custer Mastr2 Dot Com Ya

[Repeater-Builder] Re: Cetec Vega question

If a manual for the Cetec Vega Tone Remote becomes available, I'd like to beg for a copy and I'll be happy to cover the costs. I just bought a 2175 function detect version of this series from Ebay and now have the manual. I'll scan it to pdf and have copies of it available to any intereste

RE: [Repeater-Builder] GE FOR SALE

This guy is on drugs Oregon Repeater Linking Group Mike Mullarkey 6539 E Street Springfield, OR 97478 541-747-1303 [EMAIL PROTECTED] www.orlg.org -Original Message- From: Tommie Taylor [mailto:[EMAIL PROTECTED] Sent: Sunday, February 27, 2005 7:15 AM To: Repeater-Builder@yahoogroups

Re: [Repeater-Builder] Cetec Vega question

[EMAIL PROTECTED] wrote: > After getting a good nights sleep, I did find another number, maybe > the model. It is 221. > > Rod O.K. Rod. A good night sleep after drinking all those vodka martinis does help. The Model 221 is the tone remote stations panels, including case and all mounting

Re: [Repeater-Builder] Cetec Vega question

[EMAIL PROTECTED] wrote: > I just received a Remote Tone Adapter built by Cetac Vega. I have > checked their web site and found nothing on this unit. I can found > this on the curcuit board: Cetec Vega 065-0338E on the back side > and this on the front side: ASSY. 011-0013 REV and also found

[Repeater-Builder] FS: Micor Compa-Station Repeater

I have for sale a Micor Compa-Station Non-Unified repeater (less cabinet) that includes the following items: TLD1683C Transmitter (110W Intermittent Duty) TRD1803BB Receiver currently on 155.28 MHz. TRD1803BB Receiver currently on 155.34 MHz. TPN1110B Power Supply TLN4959A Chassis TLN4670BPR Li

Re: [Repeater-Builder] General Electric Mobile Radio ID

eric lemmon wrote: >I am taking over a 6m repeater that uses two GE mobile radios, with the >following model numbers: RT74AAN33AH, and RT74AAW33AH. The owner >thinks that the radios are "GE Mastr Pro" but the info I found on >several Web sites leads me to believe that they are "GE Executive II"

Re: [Repeater-Builder] Cetec Vega question

After getting a good nights sleep, I did find another number, maybe the model. It is 221. Rod I remember those ... seems like many years ago. I just don't remember where I put my collection of Cetac Vega diagrams. Sorry about that. I'll try to go looking though, Neil - WA6KLA

[Repeater-Builder] General Electric Mobile Radio ID

I am taking over a 6m repeater that uses two GE mobile radios, with the following model numbers: RT74AAN33AH, and RT74AAW33AH. The owner thinks that the radios are "GE Mastr Pro" but the info I found on several Web sites leads me to believe that they are "GE Executive II" radios. What is the co

[Repeater-Builder] Re: Micor 2M Receiver - W3KKC

[EMAIL PROTECTED] wrote: > Kevin, >Am interested in Micor Rx. > Replied directly. Kevin Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED]

Re: [Repeater-Builder] Re: FS: Genuine Factory 142 - 150.8 MHz. (TLD-8272B) Micor 2M Receiver - W3KKC

Kevin, Am interested in Micor Rx. What are you asking for it? Gary K2UQ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of

[Repeater-Builder] GE FOR SALE

FOR SALE 2 Ge Master II Continuous Duty Repeaters (COMPLETE) Currently in operation in Lampasas TX ALL FOR $5000.00 NOTE: All Systems are Currently in Operation. System will need to be disassembled after sold. Shipping is not available (Local Pick-Up).. 2 Repeater Cases (UHF Outside

Re: [Repeater-Builder] Re:77-88 Mhz Repeaters

27 Feb 2005 We have new MIdland Mid Band product capable of 77-88 Mhz and will quote rack mount repeater for this range configured out of these sub-assemblies. All new equipment, contollers, duplexer etc Guaranteed Ed Folta Com/Rad Inc Des Plaines, IL http

[Repeater-Builder] Re: FS: Genuine Factory 142 - 150.8 MHz. (TLD-8272B) Micor 2M Receiver - W3KKC

No response, so the item starts at $1.00. Free ship with Buy It Now. Kevin Custer Kevin Custer wrote: > I have a genuine factory Motorola Micor receiver in the 142 - 150.8 > Megahertz split. > Great for 2 Meter or MARS Repeaters

Re: [Repeater-Builder] Cetec Vega question

I remember those ... seems like many years ago. I just don't remember where I put my collection of Cetac Vega diagrams. Sorry about that. I'll try to go looking though, Neil - WA6KLA [EMAIL PROTECTED] wrote: > > I just received a Remote Tone Adapter built by Cetac Vega. I have >