I am involved in planning a similar installation. The other problem is that
the base gets extremely hot in the summertime. I was thinking of connecting a
clothes dryer vent hose to one of the unused entry ports that the coax usually
gets routed through the wall. (The flexible solid aluminum t
--- In Repeater-Builder@yahoogroups.com, XE2SI <[EMAIL PROTECTED]> wrote:
> are you using pin # 10 of J3 ?? use pin # 5 of J4, this will
> give plenty of detected flat audio.
> Juan, 73 de XE2SI
>
I am on J4-5 and only a higher frequency tone >200Hz will decode very
intermittently. J3-10 was no
Years ago we had a repeater that was housed in an old refrigerator. As you
know they are well insulated. Had a light bulb hooked to t-stat for keeping
it warm in the winter. In the summer there were fans to move air up and out
the back to keep it cool. That was on a t-stat also. Maybe an idea for
k
Message: 14 Date: Sun, 19 Jun 2005 01:55:40 - From: "skipp025" <[EMAIL PROTECTED]>Subject: Re: 4-pole folded dipole ant.Plus the distance from the tower... > "Paul Finch" <[EMAIL PROTECTED]> wrote:> It depends a lot on the size of the tower and if the dipoles are pointed> toward
Hi All,
This is that cheap little import 2 section FB Stick that stands around 6-7 ft tall.
Any have the tuning lengths for this little guy for 146/445?
Lost the piece of paper!
Thanks
Brian
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.c
Hi all,
I need help with an FTL-2011/99...
When I try to read it the software says "wrong front panel"...
Can somebody help me please ???
Thanks in advance.
Best 73´s,
Silva.
*
Brazilian Ham Radio
Callsign : PY8ELO Old calls : PU2ELO/PP2ELO/PY
I am re-building our repeater system and have had problems with Astron
pwr supply (50amp) version being highly sensitive to RF. (147.210) It
has some corrosion showing on output transistors base and has been
subjected to enviornmental/physical abuse.
Any suggestions on 35amp or so power supply
>
>Any suggestions on 35amp or so power supply with battery backup for
>short transitional switch over to generator power. We are on top of a
>hospital on generator power when needed.
I've heard lots of stories of the astrons being RF sensitive. Kind of
amusing considering they intentionally sel
All you have to do is keep the equipment cabinet warmer than the dew point
I have had equipment inside a water tower for years without any
condensation problems and it wasnt even in a cabinet.
tom n8ies
> [Original Message]
> From: Mike DeWaele <[EMAIL PROTECTED]>
> To:
> Date: 6/19/2005 9:24:2
Isn't there a web site that may or may not have some
info. ? Cushcraft has something like that.
Mark A. Holman AB8RU ARRL Life Member[EMAIL PROTECTED]
- Original Message -
From:
[EMAIL PROTECTED]
To: repeater-builder@yahoogroups.com
Sent: Sunday, June 19, 2005 1
as long as you have a good seal and a way to lock it.
if all else fails dandy smoker for the Feild Day for fish steaks etc..
Mark A. Holman AB8RU ARRL Life Member
[EMAIL PROTECTED]
- Original Message -
From: "Mike DeWaele" <[EMAIL PROTECTED]>
To:
Sent: Sunday, June 19, 2005 9:20 AM
Su
I was thinking on the order which is solar powered charger & supply like say
a batch of muffin fans from the computer P/S ? I heard something like that
some time back to cool the attic to a house besides free electricity &
environmentally friendly.
as to humidity problem, I would go to a plac
I have one for 2.5 years now,no problem at all.
my qth is near the St-Laurence River,(750 feets),very salted winds around
here and before you install
her ,grease it it is not a quality of Diamond but great value for the $
73/s
ve2ckn,gervais
Bic,Quebec
>From: "Mark A. Holman" <[EMAIL PROTEC
Thanks for all of the good tips!
We're going to try and seal a cabinet with I/O fans attached to keep
it cool while keeping it dry. We're also going to try the
dehumidifier and seal up the area a bit better at the base. Never
hurts to try, right?
Thanks again!
Chris
Yahoo! Groups
Can anyone help me locate a manual or accessories for a Data Signal, Inc
ATI-300
Automatic Telephone Interconnect?
Thanks
Rob
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an
15 matches
Mail list logo