The Heliax duplexer works great with a 1 mhz Split... but I think he is
Running a 500Khz split
He will need either a higher Q type can Or more than 6 Heliax's for
the isolation
Dick wrote:
>Steve:
>
>A friend built one of trhese heliax 6 m duplexers and swears by it.
>
>73,
>
>Dick
>
>---
I was thinking non-unified Chassis Micor, too.
Joe M.
[EMAIL PROTECTED] wrote:
>
> Early high band Micor Base Station.
>
> I have 2 or 3 here ...
>
> Neil - WA6KLA
>
> Original Message
> From: [EMAIL PROTECTED]
> To: repeater-builder@yahoogroups.com
> Subject: RE: [Repeater-Bu
hI
Thanks for reply. I may have another try
Steve
- Original Message -
From: "Dick" <[EMAIL PROTECTED]>
To:
Sent: Friday, March 17, 2006 11:16 PM
Subject: Re: [Repeater-Builder] 6mtr duplexer
> Steve:
>
> A friend built one of trhese heliax 6 m duplexers and swears by it.
>
> 73,
>
> Di
Hi
yes Iam runmning 500Kc split 51.250 rx and 50.750 tx
that is what the powers that be in the UK issue
73
Steve
- Original Message -
From: "Neal Newman" <[EMAIL PROTECTED]>
To:
Sent: Saturday, March 18, 2006 8:42 AM
Subject: Re: [Repeater-Builder] 6mtr duplexer
> The Heliax duplexer
The picture I saw had the 50 conductor ribbon interconnect cable
attached.
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Can anyone identify this?
Date: Sat, 18 Mar 2006 05:17:36 -0500
>I was thinkin
Rick Stirling wrote:
We have a repeater given to our club. It is more or less in working
condition on the 2 meter band. Trouble is there is no controller or
id-er, etc.
http://www.rickster.org/pics/unknown.jpg
I've been told it is a Compa-Station but I haven't been able to
correlate t
Several years ago, I had an installation of the non-unified
chassis system installed at my then repeater site. Since it was
wired as a repeater (amateur band) I wanted to be able control
it as the FCC requires - so I left the DC transfer module and the
line driver cards in the control s
That's the same split (500 kc) as WB5WPA designed the heliax duplexer
forthere shouldn't be any reason it won't work in the U.K.
At 05:42 AM 3/18/2006, you wrote:
>Hi
>
>yes Iam runmning 500Kc split 51.250 rx and 50.750 tx that is what the
>powers that be in the UK issue
>
>73
>
>Steve
>
Hii
thanks for info, I will have another try, time permiting.
73
Steve
- Original Message -
From: "Robin Midgett" <[EMAIL PROTECTED]>
To:
Sent: Saturday, March 18, 2006 1:19 PM
Subject: Re: [Repeater-Builder] 6mtr duplexer
> That's the same split (500 kc) as WB5WPA designed the heliax
Dick,
Thanks to you and the others who replied. Maybe now I'll get one of
these put together.
Al, K9SI
> Date: Fri, 17 Mar 2006 15:49:04 -0800
> From: "Dick" <[EMAIL PROTECTED]>
> Subject: Re: Re: 6mtr duplexer
>
> Al, the bigger the heliax diameter, the higher the Q and the easier it i
Hi Steve,
The GB3FH repeater in Somerset is using a heliax duplexer and it is truly
excellent!
If you like I can send you the plots from the analyser that shows the
performance of the duplexer, they are only small jpegs - don't think I can
send them to the list as I think it strips attachments
Hi
yes be interested in seeing the spec analyser plots.
I really need to get one built for me, I don't have the gear or cable etc to
make one. I did ages ago play about with a couple of lenghts of 1 5/8 heliax
but it was a failure.
Iam testing at present using 2 aerials it works but this is purely
Very interesting adaptation for tuning... I may have to investigate further
with this approach!
73
Mike
K5JMP
www.k5jmp.us
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of steve
Sent: Saturday, March 18, 2006 12:53 PM
To: Repeater-Builder@yaho
Paul, there's always aluminum...lots cheaper than copper, and much
more available.
Dick
- Original Message -
From: Paul Holm
To: Repeater-Builder@yahoogroups.com
Sent: 17 March, 2006 18:17
Subject: Re: [Repeater-Builder] Re: 6mtr duplexer
For all the looking I've done, I've only ever f
You can always use more "cans" made of heliax. I've seen some duplexers
made of 1.75 inch heliax and 8 cans.
73,
Dick
- Original Message -
From: Robin Midgett
To: Repeater-Builder@yahoogroups.com
Sent: 18 March, 2006 05:19
Subject: Re: [Repeater-Builder] 6mtr duplexer
That's the same
FB, Al:
Always happy to help.
I'll soon be building a 6 m duplexer from 2" Alumispline coax.
Great stuff, but a bit of a pain to work with.
73,
Dick W1NMZ
- Original Message -
From: Al Wolfe
To: Repeater-Builder@yahoogroups.com
Sent: 18 March, 2006 07:48
Subject: [Repeate
Thanks to all who replied. It appears I was asking too much for the set
($1200), and I have been informed that everything else is pretty much worthless
except for the duplexer. So, I have decided to scrap the hardline and
the antenna, trash the repeater and take offers on the cans. If you
[EMAIL PROTECTED] wrote:
> Thanks to all who replied. It appears I was asking too much for the set
> ($1200), and I have been informed that everything else is pretty much
> worthless except for the duplexer. So, I have decided to scrap the
> hardline and the antenna, trash the repeater and take
OK, I'm getting intereswted in the enire 6 m rptr...the whole kit &
kaboodle.
Where are you and it?
TNX & 73,
Dick W1NMZ
- Original Message -
From: Nate Duehr
To: Repeater-Builder@yahoogroups.com
Sent: 18 March, 2006 12:26
Subject: Re: [Repeater-Builder] Re: 6mtr duplexer
[EMAIL PRO
[EMAIL PROTECTED] wrote:
> Thanks to all who replied. It appears I was asking too much for the
> set ($1200), and I have been informed that everything else is pretty
> much worthless except for the duplexer. So, I have decided to scrap
> the hardline and the antenna, trash the repeater and take
I wouldn't say they are worthless.. but 1200 bucks was a little on the
steep side. I bought 4 complete low-band Micor stations for 30 bucks plus
shipping each. And they had the continous duty PA's (which is pretty much
what I was paying for, meaning the PA).
Speaking of... Mike Morris.. do yo
where are you located?
[EMAIL PROTECTED] wrote:
> Thanks to all who replied. It appears I was asking too much for the set
> ($1200), and I have been informed that everything else is pretty much
> worthless except for the duplexer. So, I have decided to scrap the
> hardline and the antenna, t
Northwest Florida, Panhandle
In a message dated 3/18/2006 3:31:12 PM Central Standard Time, [EMAIL PROTECTED] writes:
where are you located?[EMAIL PROTECTED] wrote:> Thanks to all who replied. It appears I was asking too much for the set > ($1200), and I have been informed that everything
Radio 5000
I am in NW Florida and hope you will not throw the
hardline away if it is good. The hams in NW Florida are always looking for
hardline and if it is good would be worth a trip to save it from the
dumpster. I do not do 6 mtr work but if I did I would be interested in the
dup
Sure thing - send working eeproms and I will re-zapp.Bosshard Radio ServiceATTN: Steve503 B. South 25th. StreetTemple, Texas 76543On 3/17/06,
hl31943 <[EMAIL PROTECTED]> wrote:
Is that an open-ended invitation? I have a couple of 2 channelPhoenixs that I'd like re-zapped on one of the channels
25 matches
Mail list logo