[Repeater-Builder] R2001-D Alignment Needed

One of our 2001-D monitors is losing it's horizontal position on the display. At this rate, it won't be long before the frequency line will be above the top of the bezel. Does anyone on this group have a service manual for these beasts? Perhaps you could point me in the right direction in t

Re: [Repeater-Builder] Re: Antenna Tower

Thanks Paul. Guess I picked up the www by clicking on the first part of the original link then pasting the work wrapped part. If that tower was in my area there is a local crane operator who would lay that stick down for less than $500 and no one would even have to climb. Dex Paul N1BUG wro

[Repeater-Builder] Motorola R2001D question regarding: sweep / tracking generator

Ok since we are talking about service monitors I have a question that has been nagging me since I recieved mine. Which for those of you that remember is working great, is a D model and was calibrated just before I got it. When I am in spectrum analyzer mode with duplex gen on and offset set to 0.

[Repeater-Builder] Re: Cushman CE3

--- In Repeater-Builder@yahoogroups.com, "Laryn Lohman" <[EMAIL PROTECTED]> wrote: > > > > Can this unit be modified to go below 450Mc? Also are there any docs > posted on the Web somewhere? Thanks > > Laryn K8TVZ > Mine does a fine job on 440. I use it on 6, 2, and 440. I also have t

RE: [Repeater-Builder] Micor Manual 68P81015E70

John, The Micor Service Manual 6881015E70 for UHF Micor mobile radios is still in print and available from Motorola Parts (800-422-4210) for about $90. It's about 1.5" thick, with many fold-out pages in color, so it's probably cheaper to buy it from Motorola than to make a copy of an existing man

Re: [Repeater-Builder] Re: Antenna Tower

Dexter leave out the WWW. AS: http://good-times.webshots.com/album/562985533mLTuoH --- Dexter McIntyre W4DEX <[EMAIL PROTECTED]> wrote: > I've tried several ways to put the link together > with no success. These > don't work for me: > > http://www.good-times.webshots.com/album/562985533mL

Re: [Repeater-Builder] Cushman CE3

Paul can help you. http://www.nselectronics.com/ I have a CE4 that I got from him. He does good work. WA Brown - Original Message - From: "retiredcss01" <[EMAIL PROTECTED]> To: Sent: Sunday, April 06, 2008 10:50 AM Subject: [Repeater-Builder] Cushman CE3 > Hi, I have a Cushman C

Re: [Repeater-Builder] Re: Antenna Tower

We just had to have a crane come in to pick a substation transformer off the ground and place it on a flatbed. There was no wait time as the transformer was all disconnected and already sitting outside the substation fence. Cost for crane was a little over $4,000.00. Now, I can only imagine the

[Repeater-Builder] Re: IFR 1600s

When I was working, the company I worked for used Cardinal. They always did good work and quite reasonable. That's who I'd use. Tom --- In Repeater-Builder@yahoogroups.com, "Joel" <[EMAIL PROTECTED]> wrote: > > > Hello Group > > > > Hope you'all may be able to help,my IFR 16006 is due for c

Re: [Repeater-Builder] Re: Antenna Tower

You added www which wasn't in the original link. Try this (it's your first try with www removed) http://good-times.webshots.com/album/562985533mLTuoH 73, Paul Dexter McIntyre W4DEX wrote: > I've tried several ways to put the link together with no success. These > don't work for me: > > http

Re: [Repeater-Builder] Re: Antenna Tower

I've tried several ways to put the link together with no success. These don't work for me: http://www.good-times.webshots.com/album/562985533mLTuoH http://www.goodtimes.webshots.com/album/562985533mLTuoH Is the picture still available? I've seen some 40+ year old towers that are still in very

[Repeater-Builder] Re: Antenna Tower

Two smart ways to get rid of that tower and both will cost some serious money. If the owner wants to reuse the feed line and antennas... add more money on the order of 3 to 6 dB min fees. Current price to properly pull that tower down is going to be between about $3k to $5.5k for the non pr

[Repeater-Builder] Re: Cushman CE3

Probably less expensive to replace with a HSO reference oscillator. 'Rock stoves' are old technology. --- In Repeater-Builder@yahoogroups.com, "Steve S. Bosshard (NU5D)" <[EMAIL PROTECTED]> wrote: > > Seems like to OEM is Oven Air - I believe they are still in business. > Steve NU5D > > > n9

[Repeater-Builder] Re: Antenna Tower

Nice tower, he should rent space on it.

[Repeater-Builder] MICRODEM is a freeware microcomputer mapping program

MICRODEM is a freeware microcomputer mapping program cheers, s. http://www.usna.edu/Users/oceano/pguth/website/microdem.htm

Re: [Repeater-Builder] Cushman CE3

Seems like to OEM is Oven Air - I believe they are still in business. Steve NU5D n9wys wrote: > If Tom needs a 5 MHz reference oscillator, they can be had for under $50 at > www.alltronics.com... I picked one up to use as an HSO in an MSF5000 >

Re: [Repeater-Builder] IFR 1600s

My 1900 has similar Tracking Generator Resolution. Low Resolution = Fastest Sweep - may pass over some stuff that would be displayed in HI RES that is a much slower sweep. I would expect some difference in the trace. Best success, Steve Bosshard NU5D Joel wrote: > Hello Group > > > > Hope y

RE: [Repeater-Builder] Cushman CE3

If Tom needs a 5 MHz reference oscillator, they can be had for under $50 at www.alltronics.com... I picked one up to use as an HSO in an MSF5000 repeater. Mark - N9WYS -Original Message- From:

Re: [Repeater-Builder] A little off-topic but may be of intrest to the group

I just got my new copy of MRT Magazine and there was an interesting article regarding digital radio systems causing problems as compared to the old analog systems. Joe http://mrtmag.com/mag/radio_silence_isnt_golden/

[Repeater-Builder] IFR 1600s

Hello Group Hope you'all may be able to help,my IFR 16006 is due for calibration but still passes all self test.The problem is in the trackin generator when tuning duplexer's it has three settings for the tracking gen, low, medium and high,I thought it was only susposed to just change the scan

Re: [Repeater-Builder] Cushman CE3

Better to replace it with a 10 MHz TCXO with a divide circuit to provide the 5 mhz or 1 mhz you need. 7490's and a buffer of a 2n. Ralph, W7HSG -- Original message -- From: "retiredcss01" <[EMAIL PROTECTED]> > Hi, I have a Cushman CE3 that the crystal heater

[Repeater-Builder] Micor Manual 68P81015E70

Does anyone know where I can get a manual for the Micor UHF Mobile? I understand that the part number for the manual is 68P81015E70. We have a local repeater that has developed a bit of noise in the receiver, and would like to track it down. Thanks! John KI4LTX

[Repeater-Builder] CE3 crystal heater

I have a Cushman CE3 that the crystal heater has died on. Does anyone have one from an old monitor that is being parted out or any suggestions? Thanks, Tom W5BLO

RE: [Repeater-Builder] Sinclair Duplexer part needed

Try c-lec plastics. They are the manufacturer of rexolite -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Monday, April 07, 2008 12:23 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Sinclair Duplexer

[Repeater-Builder] Cushman CE3

Hi, I have a Cushman CE3 that the crystal heater has died on. Does anyone have a heater or an old CE3 that they are parting out? If so, let me know price and how to contact you. Thanks, Tom Dow W5Blo

[Repeater-Builder] fx5000 eng version 2.1, help?

hi i have the 2.1 software for the fx5000. any one used this im looking for a programming manual as this dont have any help files. what eprom programmers does it use? any one help.

Re: [Repeater-Builder] Motorola Micor VHF 1/4 Kw Repeater Available

I would be intrested in the UHF micors. What do you want for them? Tom W9SRV r_s_s_i <[EMAIL PROTECTED]> wrote: Hello, Help me CLEAN out my garage ! I have a very, very clean Motorola Micor VHF (currently in 154.xxx TX / 155.xxx RX - Range) 1/4Kw repeater available for sale. It is in the 6 f

Re: [Repeater-Builder] Micor VHF 1/4 KW Repeater Available

Hi Steve! Its been rolling around in my head! What would you like for it? Transport is not a problem, I've gotten 6 ft cabinets in the van before. Brian In a message dated 4/7/2008 3:31:55 A.M. Central Daylight Time, [EMAIL PROTECTED] writes: Brian, I kept your email in case it tur

[Repeater-Builder] Re: Service Manual Needed for TPL PA6-1BERX UHF Repeater Amp

Thanks. Found it there. --- In Repeater-Builder@yahoogroups.com, Mike Morris WA6ILQ <[EMAIL PROTECTED]> wrote: > > At 08:04 PM 04/06/08, you wrote: > >Anybody have a service manual for this item that they can scan in and e- > >mail? > > > Have you looked on the repeater-builder.com web site (

Re: [Repeater-Builder] Micor VHF 1/4 KW Repeater Available

Brian, I kept your email in case it turned out this was still in my garage and available now this spring. Are you still interested? I would like to clear up some space in my garage, and have a few other projects that I can use the space and funds for. I can help with transportation if that