RE: [Repeater-Builder] FW: climbing cost WAG help

2009-05-10 Thread Ham-Radio
The last crew I hired cost me $1.00 per foot per man on the tower plus $60.00 per hour for ground crew. The hard line you can estimate. Charles Miller -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of kf0m Sent: Friday, May

[Repeater-Builder] Re: Info on old Repco UHF receiver needed.

2009-05-10 Thread skipp025
Hi Steve, Not knowing model numbers for Repco gear I will say I have a number of Repco Manuals scanned into pdf. If you can describe it to me or send me a picture of it... I might be able to help. Probably best to do it direct... cheers, skipp skipp025 at yahoo.com > "wa4ita" wrote:

[Repeater-Builder] Info on old Repco UHF receiver needed.

2009-05-10 Thread wa4ita
Hi, I have an old Repco TLR5uc-Q- and I could sure use an instruction sheet and pin out. Can anyone help? TNX de Steve, WA4ITA

Re: CORRECTION Re: [Repeater-Builder] (anderson power poles revisited)

2009-05-10 Thread MCH
Well, I *was* addressing your comment of "Also just to be accurate, there aren't "many" ways they can be configured, only two", and not how many "correct ways" there were based on the ARES/RACES standard. If you go by how many "correct ways" there are to configure them per that standard, the ans

[Repeater-Builder] Re: 450 Micor Repeator Amp

2009-05-10 Thread k0jxi
Thanks for the information, Dale --- In Repeater-Builder@yahoogroups.com, Captainlance wrote: > > yes, no problems.Just keep the drive between 1.5 and 2 watts, with the power > set adjusted for 80 watts or less at the antenna port... > > Lance N2HBA > - Original Message - > From:

[Repeater-Builder] Re: Do you know Any Kenwood TKR 720 in Junk? to salvage MPC......

2009-05-10 Thread skipp025
Hi Peter, You best bet is to watch Ebay for a "tech special", which is most often when some one else makes a train wreck out of a repeater. You might also check in to see if the tkr-820 chip is the same up. I'd have to take a look at the circuit details but I would think they are the same unle

[Repeater-Builder] Do you know Any Kenwood TKR 720 in Junk? to salvage MPC......

2009-05-10 Thread Peter P J
Further to my earlier posting, I tried to locate the Microprocessor Chip for the TKR 720- IC uPD 75104G-604-1B, from all known sources in US to Hongkong! Pacparts and Kenwood HK clearly said it is out of production and no more available, AND no substitutes!!. Two requests: No.1. Can any one

Re: CORRECTION Re: [Repeater-Builder] (anderson power poles revisited)

2009-05-10 Thread Nate Duehr
MCH wrote: > I have to correct something I said. I forgot that while the PPs are > genderless as far as the connectors go, the KEYWAYS are not, so half of > the 16 configurations will not mate. > > As such, there are only 8 configurations that will mate. > See the attached pic. > Number 1 is the