What software & Rib interface is used on a Motorola SM-120?
Were can I locate the information on programming Motorola SM-120?
Thanks for your time.
73's, Jim Kh6jkg.
I probably could, but I never know what to charge for stuff like that.
Mel - WA6JBD
> Mel - Looks like you could have a
> side job re-working these things for hams.
>
> Chuck
> WB2EDV
Buna Ziua Eric,
I'll relay that information back to Daniel in Romania.
Multumesc
La revedere
skipp
> "Eric Lemmon" wrote:
>
> Skipp,
>
> The manual for the HLNB R*I*C*K is 6880901Z79, still available from
> Motorola Parts for about $5. Since it is still in print and is copyrighted
> Gary Hoff wrote:
> Sorry Skipp, never got that request, sometimes I think
> not all the emails to this group end up getting forwarded to
> me. If you've followed the thread you know I did order one
> that is not quite exact but should work. Thanks again
> everyone for your help.
> Gary - K7N
OK, It just may be because it's late on a Saturday night, but I am stumped.
I have a UHF 100W secure capable MSF5000 that when I key the TX (doesn't
matter how of the GOZILLION ways) the 'PA On', 'PA Key' and 'PA Full'
LED's light for a split second and then I get no power out. I am testing
int
Sorry Skipp, never got that request, sometimes I think
not all the emails to this group end up getting forwarded to
me. If you've followed the thread you know I did order one
that is not quite exact but should work. Thanks again
everyone for your help.
Gary - K7NEY
On 4/17/2010 5:52 PM, skipp02
> Joe wrote:
> I don't know if this was suggested, but you can buy a
> cap of larger value that physically fits the area and
> then remove a plate/stator or two to get the proper value.
>
> Removing a plate and/or stator is a trick from way back
> in ham time when people scrounged parts and ma
Skipp,
The manual for the HLNB R*I*C*K is 6880901Z79, still available from
Motorola Parts for about $5. Since it is still in print and is copyrighted,
it should not be posted anywhere for download, lest the long arm of the law
be felt by the perpetrators. I suggested to the individual that h
Hello to the Group,
I've got someone from Romania Emailing me regarding the
Motorola Rick and it's setup. I thought there might be a
bit of information (IE a Manual) for it on the RB Pages
but I'm not able to find any.
Besides the Batlabs site, is/does anyone have a web page
up for the Moto
GE are sold to Bill
Moto are sold to Tony
Pending paypal
Thanks
--- In Repeater-Builder@yahoogroups.com, "terry_wx3m" wrote:
>
> I recently took 2 UHF machines off the air.
>
> I have for a Mastr II 1 5C on 442.050 and 1 EC on 447.050. These were custon
> built by Bomar crystal at a cost of
--- In Repeater-Builder@yahoogroups.com, "terry_wx3m" wrote:
>
> I recently took 2 UHF machines off the air.
>
> I have for a Mastr II 1 5C on 442.050 and 1 EC on 447.050. These were custon
> built by Bomar crystal at a cost of $35 each plus shipping and are temp
> compensated. Send me $40 a
I'm looking for schematics for a 19B234871 Tone/Remote / Repeater Control Panel
for a Mastr II Base station. The one Repeater Builder:
http://www.repeater-builder.com/ge/lbi-library/lbi-31853e.pdf seems to be newer
then the one I have. Also I have no idea where to look to see what Rev. it is.
T
I'll take the Micor elements. PM sent to Terry (hope it didn't get
caught in a spam filter...)
On 04/17/2010 02:58 PM, terry_wx3m wrote:
I recently took 2 UHF machines off the air.
I have for a Mastr II 1 5C on 442.050 and 1 EC on 447.050. These were
custon built by Bomar crystal at a cost
I recently took 2 UHF machines off the air.
I have for a Mastr II 1 5C on 442.050 and 1 EC on 447.050. These were custon
built by Bomar crystal at a cost of $35 each plus shipping and are temp
compensated. Send me $40 and and I will send them to you.
Also for Micor, I have a KXN1052A on 443.05
Mel - Looks like you could have a side job re-working these things for hams.
Chuck
WB2EDV
- Original Message -
From: "Mel Swanberg"
To:
Sent: Saturday, April 17, 2010 12:00 AM
Subject: RE: [Repeater-Builder] Identify Please
Hi Eric,
The steel cases are not an impediment to the mag
I don't know if this was suggested, but you can buy a cap of larger
value that physically fits the area and then remove a plate/stator or
two to get the proper value.
Removing a plate and/or stator is a trick from way back in ham time when
people scrounged parts and made them work.
73, Joe,
16 matches
Mail list logo
