Ian,
The SM-4450-NE is 488 to 512. If you program 517 you are out of band for
that radio.. The ones I have are the NC 450-470 and two special order NB
420-450 radios. The NB are not available anymore.
I know on the ones I have, when you get more than about 1 MHz out of band
the PLL will unlock
Chris,
Having work on many in the past and rebuilt 3 amp after lightning strikes.
Needless to say it took several hours to repair each and 3 days to rebuild
each.
I do not know if the parts are still available from Motorola, but they may
be. I know they do not repair them at the depot anymore.
Find,
I have tried to contact you direct. No reply.
Here is what I sent.
**
I'm not sure what the cost would be, but that could be worked out.
What is the price in USD that you want for the UHF Quantars?
What i
Chris,
Fred could not have said it better. He is 100% correct. I have worked on
both, and I must say the Quantro is easier to work on.
Charles Miller
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Frederick Bray
Sent: Mo
Wesley,
We had several of these where I used to work. When our units would act up we
would take the cover off and unplug every module and reseat them. This would
resolve the issue about 90% of the time.
Good Luck.
Charles Miller
-Original Message-
From: Repeater-Builder@yahoogroups.co
:18 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] For Sale - Micor Upgrade
what band/frequency range is this for?
-- Original Message --
Received: Sun, 27 Sep 2009 10:09:32 PM PDT
From: "Ham-Radio"
To:
Subject: [Repeater-Builder] For Sale - Mic
Greetings all,
Do you have a Micor that needs an upgrade?
I have the ultimate upgrade for your Micor VHF Repeater.
This is what I have.
Motorola Micor Upright Base and Repeater (RT) Station manual: 68P81022E90-F
8560AS tubes in pairs- three pairs for total of six spare tubes
TPN1132A Low V
Doug,
If you are measuring the VSWR at the TX Out you will see the VSWR of the
cavity and the antenna. If the cavity is not properly tuned you may see a
high VSWR. To check this put a dummy load on the antenna port of the
cavities. If the VSWR is less than 1.5:1 then you are good. If it is higher
The last crew I hired cost me $1.00 per foot per man on the tower plus
$60.00 per hour for ground crew.
The hard line you can estimate.
Charles Miller
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of kf0m
Sent: Friday, May
sage -
From: Ham-Radio <mailto:ham-ra...@cap-comm.com>
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, March 04, 2009 4:51 PM
Subject: RE: [Repeater-Builder] For Sale 3 GE Mastr II Stations & ICOMs
Don,
I have an IFR-1000S that works. Needs a new battery. Neg. on price.
I also h
Don,
I have an IFR-1000S that works. Needs a new battery. Neg. on price.
I also have a Motorola R2600C. Works great, only needs calibration.
Do you still live in Boise, ID?
Charles Miller
WD5EEH
Dallas, TX
AJ,
I can not tell you about the Telewave, however I can tell you about the DB
units I have looked at.
They have a short on all ports, and the DB Engineers that I have spoken to
report this is the design. They are DC Short design just like the folded
dipole antennas. Resonate at frequency of op
AJ,
You asked what is the lowest power level for the Mastr2 radio. I had taken a
250 Watt base and turned it down to 10 Watts out for testing purposes with
out generating any spurs.
However, If I remember to documents say to not run the poweer any lower than
50% of rated power out.
Remember,
Cry a bunch of tears, build a bridge and get over it!
What gave you the idea that products made by Decibel Products were made for
Amateur Radio?
DB made commercial grade, NON-HAM products. They provided a service to the
amateur radio community by making some of the products available to the
amateur radio service. Is was still the same commercial gra
Don,
You are correct. You will not have any problems except through the tower.
Put one bracket at the top and one at the bottom for stability.
Charles Miller
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Don Kovalchik - W8DPK
Sent: Monday, August 25
I' Don't mean to be disrespectful or anything like that.
WHAT DOES HE THINK.
1960, RUST, LOADED, OVERLOADED MAYBE.
It would cost at least $3,000 to touch it, if a crane was not needed.
And he want's someone to PAY HIM. I don't thnk so.
If he wants it removed then HE WILL PAY.
Been there, Done
Jim is correct. The experimental call signs are listed in 47 CFR 2.302.
Experimental (X follows digit) 2 letters, 1 digit, 3 letters
KA2XAA to KZ9XZZ and WA2XAA to WZ9XZZ only.
As you can see it does not include ONE Land or ZERO Land.
There is not anything that I could find on the WC#xxx call si
6,756,867,234,967.84562936502648 If my Calculation is Correct.
GOT IT
I thought you may have been one of those Texas A&M Folks.
* Daron J. Wilson Wrote:
> Perhaps you missed my pun
>
> > Think about it a little.
> >
> > * Daron J. Wilson Wrote:
> >
> >
> > > I've signed up for that one but it seems to require a new sign up
> every
> > > day
Think about it a little.
* Daron J. Wilson Wrote:
> I've signed up for that one but it seems to require a new sign up every
> day.
>
> >
> > A new group has been set up to discuss setting up new groups.
> >
> > http://groups.yahoo.com/group/departmentofredundancydepartment
>
Yaho
Your site does not work. At least not from this end.
- Original Message -
From: <[EMAIL PROTECTED]>
To:
Sent: Tuesday, December 16, 2003 3:21 PM
Subject: [Repeater-Builder] New Pics..
> http://www.geocities.com/Blimkie87bn/index.html
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
> To
New or Used ?? I have a used IFR 1000S, in good condition, and it works. Cal
cert expired and needs battery for battery operation. Asking $3,000.00 USD
reply direct to [EMAIL PROTECTED]
- Original Message -
From: "ve3oks" <[EMAIL PROTECTED]>
To:
Sent: Thursday, December 04, 2003 9:01 AM
Won't hurt. That is what we did here in Dallas at the Local air port on the
south end of town. Ours id on 800 but the principle is still the same.
Charles Miller
- Original Message -
From: "chiefsfan" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, December 02, 2003 5:26 PM
Subject: [Repeater-Bu
You might even want to file a formal complaint with the FCC. What they did
was in violation of FCC rules and Regulations.
Charles Miller
WD5EEH
Dallas, Texas, USA
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
You Will Not
Believe This Study.
Here's something you can clip out
of the paper and send to a friend:
By Alex Burton
These are not misspellings or typos. And if you think it was easy to copy
this you are dead wrong. I nearly went nuts.
Aoccdrnig to rscheearch at an Elingsh uinervtisy, it de
I have a IFR-1000S with manuals and in good working condition. Unit is out
of calibration certification.
I have used this unit to maintain several HAM and Commercial repeaters. I
have a NEW Motorola box that I am still learning how to use.
I am asking $3,000.00 plus shipping from 75201. CONUS onl
27 matches
Mail list logo
