Re: [Repeater-Builder] Manuals for RCA and other MFGs: was --> received a rca repeater

Hi Dave, looking for a GE mastr II uhf radio service manualalso a mitrek vhf manual. - Original Message - From: "Dave Schmidt" <[EMAIL PROTECTED]> To: Sent: Friday, September 05, 2003 9:58 AM Subject: [Repeater-Builder] Manuals for RCA and other MFGs: was --> received a rca rep

[Repeater-Builder] manuals please help

I am looking for a couple of radio manuals. I need a GE MastrII UHF mobile(75 watt) manual and a Motorola Mitrek VHF Manual. In the process of putting a repeater together and need the manuals top help re-tune the radio's for proper operation. N2LSJ Your use of Yahoo! Groups is subject to ht

[Repeater-Builder] mastrII help

Hi, have a UHF GE MastrII using as a repeater with a nhrc 2 controller and the control head/cable w/ mic hooked up for power.. The audio level (on the output) seems to be low. I have the pickup on pin 20 on J901 and using CAS(pin 9 on J904) for the controller. Or should I use the RUS pin on 904 boa

[Repeater-Builder] ic 221

greetings, I have a pair of 221s radio's. they were a repeater pair. the tx radio lost the power output so I have switched the "roles" of the radio's. I would wonder if anyone can help me with the programming of these radio's. I have the program and the box to connect to the radio. thanks, Loren.

[Repeater-Builder] ts -32 question

I have a ge Mastr II mobile radio converted top a repeater. I have been experiencing some problems here the last few days as the radio is hearing something and going into tx and not unkeying till it times out.All I hear is squelch and I am unable to turn it up as all the way and it is not enough. I

Re: [Repeater-Builder] Re: ts -32 question

I WANT TO THANK ALL THAT REPLIED AND TOOK THE TIME TO HELP ME. IT WAS ALL GREAT ADVICE. I FOUND THAT THE RADIO WAS CLEAN AND SO WAS THE SITE, SWR WAS LOW BUT ON THE WEEKEND I WAS GETTING SOME SIGNAL FROM SOMEPLACE THAT WAS KEYING THE REPEATER AND SOMETIMES DROPPING OUT THEN BACK ON AND OTHER TIMES

[Repeater-Builder] I am looking for

I am in need of the test cable for a 4ex3a11 for the mastr II, the red and black test cable with or without end. If you have an extra please let me know if you would part with it. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-B

[Repeater-Builder] battery question

Got a small question, I have recently been given a pair of 12 v BAT_0103 batteries. These are sealed lead acid cell (UPS) and are 75 amp hr. I am currently using a pair of car batteries as battery back-up. Are the sealed ones better to use or does it make no difference. The GE power supply will

[Repeater-Builder] ref battery question> thanks

I want to give a very big Thank You to the following: Dave WB2FTX, Lee, Bob NO6B and Doug. You were nice enough to answer my query. After posting the "goofy" question I was in amazement as to the amount of information I did not know and the information available. I sit here Humbled and amazed. M

Re: [Repeater-Builder] GE Mastr II - what have I got?

you have a mobile unit,12volt,40 watt,30khz spacing,8 freq capable,1 tx and 1 rx in radio,standard options, 150.8 to 174 mhz range. hope that helps - Original Message - From: "Don Pomplun" <[EMAIL PROTECTED]> To: Sent: Sunday, April 17, 2005 1:25 PM Subject: [Repeater-Builder] GE Mastr

[Repeater-Builder] base station power supply

I have a GE base station supply with battery back up option, Is there anyway to make the change-over from ac to battery faster? It seems to take about 30 minutes. seems way to long. Loren Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/R