[Repeater-Builder] intermod/interference??

filter is the way to go. Guess it depends on how wide and deep the notch is??? I tried the intermod Calculator and I think I see what the problem is, but not sure if I'm looking at it correctly. TNX in Advance, Dennis ki5fw Yahoo! Groups Links <*> To visit your group on

[Repeater-Builder] Re: Kenwwod single band transcievers as remote (CONTROLLED) inputs

mic connector changing the function of the up/down pins in the > mic connector to serial in/out. I need to know what baud rate I need > to send the radio data. I need to know the format that the radio is > expecting. I need to know the parameters that the radio is expecting. > I

[Repeater-Builder] Re: Setting dual squelch levels

the recv'r opens right back up. This will cycle like this until the squelch closes back up (weak signal goes away). Try tightning your squelch just slightly, better yet check for any desense. I hope this makes some sense. I know what I'm trying to say, just have a hard time expre

[Repeater-Builder] Q 202g VHF duplexer "For Sale"

0 watts Tx noise supp. at Rx freq. 80 dB Rx isolation at Tx freq. 80 dB Temperature range -40 to +60C VSWR 1.5:1 Dennis Carpenter ki5fw Meridian, MS 39305 cell (601)527-6880 No interest will result in E-bay. TNX Yahoo! Groups Links <*> To visit y

[Repeater-Builder] Remote Base Sytem "For Sale"

All cables and manuals included. (not sure if I have a manual fer the Kenwood 231)Prefer cashier/money order type payment. Personal checks holds goodies fer 10 days. TNX, Dennis Carpenter ki5fw Meridian, MS [EMAIL PROTECTED] 601 679-5668 (nites) Yahoo! Groups Links <*> To vi

[Repeater-Builder] Re: Rugged 2-meter beam

150mhz. Dennis ki5fw --- In Repeater-Builder@yahoogroups.com, Kevin Berlen <[EMAIL PROTECTED]> wrote: > We are looking for a rugged 2-meter beam suitable for installation at the > 300 foot level > on a 500 foot broadcast tower. This will be uswed to link a 440MHz sytem to >

[Repeater-Builder] db224E Price?

What price shud one expect to pay for a new db224E? Is $485.00 plus shipping a fair price? TNX in advance, Dennis ki5fw Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this gr

[Repeater-Builder] vertex 5000- pl decode

with the cat-300dx (if yes how do u wire it) or is it better to go ahead and add a ts t-64 wired directly to the cat-300dx? I've been told the repeater itself has both a builtin controller and decoder. Can they be used seperatly??? Thanks in advance, Dennis ki5fw Yahoo! Groups

[Repeater-Builder] MSF 5000

arket??? The club is wanting to know if it is worth the time and investment to get it on the air. TNX, Dennis Carpenter ki5fw Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group,

[Repeater-Builder] G6-144b or Ringo???

t U guys do not recommend Ringo's in duplex. The only question I'm asking is how much of a performance increase can be expected, if any, in using two G6-144b's over two ARX2 Ringo's??? I may get them to spring a couple hundred bucks for two new Hustlers. Tnx, Dennis ki5fw L

[Repeater-Builder] Re: ts -32 question

Volume/squelch control besides the internal NHRC board check the main plug for tightness and gud connection. Dennis ki5fw In Repeater-Builder@yahoogroups.com, "Q" <[EMAIL PROTECTED]> wrote: > Since my posts are being censored,I won't bother answering any more >

[Repeater-Builder] Re: audio problems

gain check all pins especially the ones passing any kind of audio signal or voltage. Something to consider, Dennis ki5fw Lauderdale Reptr Group w5LRG 146.970/R 444.500/R Meridian,.MS > > The best thing to hit the Internet in