Just acquired a MSR 2000 VHF base station at a Hamfest. It had a problem in
the PA Deck (intermittent duty 100 watt version) but I have fixed that already
(bad solder joint on one of the output transistors). It is a two receiver
carrier squelch only model. I found a copy of the RF manual on
Just acquired 2 Micor VHF High Band stations - a 100 watt continuous duty
repeater in a 42 cabinet and a 36 cabinet with a low power 2 frequency
transmitter and two receivers. Looks like there is some sort of antenna
network in the bottom rx that feeds the second rx. My real question is about
Have the original in use on a 2 meter repeater - it works fine - I love the
serial programming for the ID and parameters. Can't do it remote, but I have
not had a need to. I will be getting one of the new models sometime to play
with. One comment - he does have protection on the two main
I just bought an R100 and want to play with it on the Ham band - It is supposed
to come with the programming software but no cable (I can build one - found the
schematic already). This repeater is DPL - does anyone have a junk R100 PL
that a guy might be able to the RX controller (IC or board)
4 matches
Mail list logo