Re: [Repeater-Builder] Iso Tee Help again

2004-12-25 Thread Joe
--- "John J. Riddell" <[EMAIL PROTECTED]> wrote: > I suggested she take a flash light and shine it > horizontally just above the carpet. Now, where's my d*** flashlight! Joe Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/

Re: [Repeater-Builder] Iso Tee Help again

2004-12-25 Thread John J. Riddell
to say "It worked".. I use this method all the time to locate small parts that drop below my work bench. 73 John VE3AMZ - Original Message - From: "Joe" <[EMAIL PROTECTED]> To: Sent: Friday, December 24, 2004 7:09 AM Subject: Re: [Repeater-Builder] Iso Te

Re: [Repeater-Builder] Iso Tee Help again

2004-12-24 Thread Mathew Quaife
The never to find zone, we all have them, unfortunately mine is the entire 1200 foot square basement. I'm sure I have it, just where is that I put it so I would never loose it. Mathew > > >--- Kevin Custer <[EMAIL PROTECTED]> wrote: > > Here is an article that will help with future > > questi

Re: [Repeater-Builder] Iso Tee Help again

2004-12-24 Thread Joe
>--- Kevin Custer <[EMAIL PROTECTED]> wrote: > Here is an article that will help with future > questions on building the Iso-Tee. > The article (somewhat humorous) was derived from the > text presented by > MDM Ted. I had to laugh about the following line: "total time for assembly for a normal p

Re: [Repeater-Builder] Iso Tee Help again

2004-12-24 Thread Mathew Quaife
THanks Kevin, greatly appreciated. Merry Christmas to all on the site. Mathew > > All, > > Here is an article that will help with future questions on building the > Iso-Tee. > The article (somewhat humorous) was derived from the text presented by > MDM Ted. > Enjoy: >

Re: [Repeater-Builder] Iso Tee Help again

2004-12-24 Thread Kevin Custer
All, Here is an article that will help with future questions on building the Iso-Tee. The article (somewhat humorous) was derived from the text presented by MDM Ted. Enjoy: Merry Christmas, Kevin Custer W3KKC Yahoo! Groups Li

Re: [Repeater-Builder] Iso Tee Help again

2004-12-23 Thread Ted Bleiman K9MDM - MDM Radio
adam you takes the t- connector and grabbing the center pin with a needlenoe pliers unscrew the thing. then cut off the part that sticks out and file the shoulder flat. this will give you an air gap. then reassmeble the connector having been careful NOT to lose the parts.(sometimes very difficu

Re: [Repeater-Builder] Iso Tee Help again

2004-12-23 Thread Adam T. Cately
At 04:01 AM 12/23/04 -, you wrote: > >I know I've brought this subject up before, but have lost all the >emails about it. I need some help building an RF Coupler Iso-Tee to >begin learning to adjust duplexers. Someone gave me some >instructions on how to build one out of a pl259/so239 t a

Re: [Repeater-Builder] Iso Tee Help again

2004-12-23 Thread Ralph Mowery
--- w9mwq <[EMAIL PROTECTED]> wrote: > > > I know I've brought this subject up before, but have > lost all the > emails about it. I need some help building an RF > Coupler Iso-Tee to > begin learning to adjust duplexers. Someone gave me > some > instructions on how to build one out of a >

[Repeater-Builder] Iso Tee Help again

2004-12-23 Thread w9mwq
I know I've brought this subject up before, but have lost all the emails about it. I need some help building an RF Coupler Iso-Tee to begin learning to adjust duplexers. Someone gave me some instructions on how to build one out of a pl259/so239 t adapter. Anyone have this information, or t