[Repeater-Builder] Kenwood TK-353 May be OT

Hey guys, I just got handed a Kenwood TK-353 to program...being new to the 353 I am not sure where to look with this problem--> I have the software and cable but cannot communicate with the radio. The port settings are correct but the computer and radio will not handshake at all. Any spe

Re: [Repeater-Builder] Kenwood TK-353 May be OT

Generally you have to put the Kenwood radios in to programming mode, then you can read/write to it. Try one of the following to get it into programming mode. Press and hold the button below PTT and C button and then turn on. Wait a couple of seconds. or Press and hold "MON" and "A" buttons, an

Re: [Repeater-Builder] Kenwood TK-353 May be OT

That did the trick. Thanks a lot. Andy KC2GOW [EMAIL PROTECTED] wrote: Generally you have to put the Kenwood radios in to programming mode, then you can read/write to it. Try one of the following to get it into programming mode. Press and hold the button below PTT and C button a