Best answer I have found for soft spoken
folks is the little mic preamp board used in some of the old GE Phoenix and MVS
radios. Little single stage amp that operated from bias on the mic line.
I usually set the deviation limit for
voice at 4.0 Khz. And allow a little for tone/dcg.
NE
B2EDV
- Original Message -
From: Steve Bosshard (NU5D)
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, April 14, 2005 5:43 PM
Subject: [Repeater-Builder] Microphone Gain and Deviation
Best answer I have found for soft spoken folks is the little mic preamp
board used in some of the old GE Phoeni
- Original Message -
From: "Chuck Kelsey" <[EMAIL PROTECTED]>
To:
Sent: Thursday, April 14, 2005 5:50 PM
Subject: Re: [Repeater-Builder] Microphone Gain and Deviation
>
> I had a friend who refused to get any closer to the microphone than 12 ".
> He
> was real d
5 8:39 PM
Subject: Re: [Repeater-Builder] Microphone Gain and Deviation
>
> I would attempt to say a noise cancelling mic. something like a SHURE
> Comm.
> Mic. or something like they used in Avaition the center slot style forget
> those ugly cheap 11M. mikes ( sledge hammer an
4 matches
Mail list logo
