--- In Repeater-Builder@yahoogroups.com, "Gmail - Kevin, Natalia, Stacey &
Rochelle" wrote:
>
> Hi All,
>
> I am in need of a circuit to read amps to my controller.
> Want to be able to read the current being used at the repeater site as well
> as the charging current to the batteries.
Kevin,
Kevin,
Here is what I use.
A 100 Amp shunt with big wire connections to go in series with the battery
leads, and small set of screw terminals to connect to the sensing circuit. The
one below generates 100 MV of voltage at 100 amps of battery charge.
http://store.solar-electric.com/mka-100-100.h
Kevin, are you using a charge controller between the solar panel, rpt,
and batteries?
Does your controller provide any kind of monitoring of current or
voltage or state of charge?
The op-amp circuits can also be extended in range beyond the VCC by
using a voltage divider on each side of the input
: rahwayflynn
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 03, 2009 12:31 AM
Subject: [Repeater-Builder] Re: Anyone got a Amp-meter Circuit to Repeater
Controller for Telementry Readback?
--- In Repeater-Builder@yahoogroups.com, "Gmail - Kevin, Natalia, Stacey &
evin, ZL1KFM.
>
>
> - Original Message -
> *From:* rahwayflynn
> *To:* Repeater-Builder@yahoogroups.com
> *Sent:* Friday, April 03, 2009 12:31 AM
> *Subject:* [Repeater-Builder] Re: Anyone got a Amp-meter Circuit to
> Repeater Controller for Telementry Readback?
&g
atalia, Stacey & Rochelle
> Sent: Thursday, April 02, 2009 3:43 PM
> To: Repeater-Builder@yahoogroups.com
> Subject: Re: [Repeater-Builder] Re: Anyone got a Amp-meter
> Circuit to Repeater Controller for Telementry Readback?
>
> Hi Martin,
>
> This is a 13.8v system, ru
- Original Message -
From: Jeff DePolo
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, April 02, 2009 2:20 PM
Subject: RE: [Repeater-Builder] Re: Anyone got a Amp-meter Circuit to
Repeater Controller for Telementry Readback?
The classic textbook method would be to
02, 2009 2:20 PM
Subject: RE: [Repeater-Builder] Re: Anyone got a Amp-meter Circuit to
Repeater Controller for Telementry Readback?
The classic textbook method would be to put a current shunt in series with
your DC source and measure the voltage drop across it. A current shunt is
just a precis
:56 AM
Subject: [Repeater-Builder] Re: Anyone got a Amp-meter Circuit to Repeater
Controller for Telementry Readback?
Kevin, are you using a charge controller between the solar panel, rpt, and
batteries?
Does your controller provide any kind of monitoring of current or voltage or
state of
9 matches
Mail list logo