At 02:11 AM 6/5/2006 -, you wrote:
>> And when you bug him please ask if they ever resolved the issue
>> where you had to unkey momentarily to switch off the repeater
>> transmitter PL encode. If not, could they schedule it into the
>> next firmware revision?
<---Mike, in all the TKR's that
I actually asked two Kenwood people about it at IWCE. The
real world is they didn't even know it was something people
would want or need. But they took the suggestion to put
into the customer asked want list...
cheers,
skipp
> And when you bug him please ask if they ever resolved the issue
At 11:36 AM 06/04/06, you wrote:
> > "Eric Lemmon" <[EMAIL PROTECTED]> wrote:
> > S, the obvious question is: How does one tell
> > the difference between K2 versions 1 and 2?
>
>The official answer is by serial number. Above x-number
>serial number is a version 2 repeater. I'll post the numb
if you use the 91D software it will work on both. ver 1 and ver 2
- Original Message -
From: "Ken Arck" <[EMAIL PROTECTED]>
To:
Sent: Sunday, June 04, 2006 2:27 PM
Subject: RE: [Repeater-Builder] Re: Kenwood TKR-750K2 Version 2 software...
> At 11:17 AM 6/4/20
ge-
> From: Repeater-Builder@yahoogroups.com
> [mailto:[EMAIL PROTECTED] On Behalf Of skipp025
> Sent: Sunday, June 04, 2006 11:04 AM
> To: Repeater-Builder@yahoogroups.com
> Subject: [Repeater-Builder] Re: Kenwood TKR-750K2 Version 2 software...
>
> You guys are making me
At 11:17 AM 6/4/2006 -0700, you wrote:
>S, the obvious question is: How does one tell the difference between K2
>versions 1 and 2? Are they physically the same, with no difference in the
>front panel controls? Is there a clue on the data plate, or must I find out
>the hard way, when my KPG-
WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of skipp025
Sent: Sunday, June 04, 2006 11:04 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Kenwood TKR-750K2 Version 2 software...
You guys are making me think
At 06:04 PM 6/4/2006 -, you wrote:
>The kpg-91d software is for current version 2 repeaters.
>Version 1 K2 software does not work with version 2 K2
>Repeaters.
>There are K2 Version 1 and K2 Version 2 repeaters...
You guys are making me think before I have my java...
The kpg-91d software is for current version 2 repeaters.
Version 1 K2 software does not work with version 2 K2
Repeaters.
There are K2 Version 1 and K2 Version 2 repeaters...
cheers,
skipp
> "Eric Lemmon" <[EMAIL PROTECTED]> wrote:
>
You are right... another brain typo.
Homer Simpson "Doh!"
cheers,
skipp
> Ken Arck <[EMAIL PROTECTED]> wrote:
>
> At 05:17 PM 6/4/2006 -, you wrote:
>
> >The cute trick was to receive a K2 Repeater with the K1 Software
> >and spend the extra time to figure out "what's up with that?"
At 05:17 PM 6/4/2006 -, you wrote:
>The cute trick was to receive a K2 Repeater with the K1 Software
>and spend the extra time to figure out "what's up with that?"
>The K1 version repeater takes the kpg-66d software. The K2 version
>repeater takes kpg-91d software. The software does not int
> "Eric Lemmon" <[EMAIL PROTECTED]> wrote:
> Dave,
> A couple of years ago, I set up a TKR-750K1 repeater for a
> local Amateur Radio club. The club bought the repeater without
> realizing that the K1 version is for 146-174 MHz, while the K2
> version is for 136-150 MHz. This was a moot point,
Short Wave Shop..? Hopefully they also know bit about VHF.
:-)
I can send you a kpg-91d dat file if you email me direct.
I've supplied a number of tkr-750 repeaters to hams... and
probably have a file around to share.
cheers,
skipp
skipp025 at yahoo.com
www.radiowrench.com
> "Dave Comp
13 matches
Mail list logo