Hi Joel,
Take a look at this page.
http://www.repeater-builder.com/db/db-4060-4062-repair.pdf
You have the classic symptom
Bernie Parker
K5BP
--- In Repeater-Builder@yahoogroups.com, Joel Hall [EMAIL PROTECTED] wrote:
Hope some of you guys that have some experince with db 4060
Well...
First:
If you have the original cable set and know the frequency of
design... might be prudent to replace them into service to see
if you can obtain the spec'd notch value.
Second:
You might note the IFR 1600's generator output value and
crank it up min 10dB and better yet 20 dB.
--- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL PROTECTED]
wrote:
Well...
First:
If you have the original cable set and know the frequency of
design... might be prudent to replace them into service to see
if you can obtain the spec'd notch value.
I did check these on the
+Subject: [Repeater-Builder] Re: db 4060 high band
--- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL PROTECTED]
wrote: Well... First: If you have the original cable set and know the
frequency of design... might be prudent to replace them into service to see
if you can obtain
4 matches
Mail list logo