Has anyone had much luck with a specra tac voter? I found one at a
good price, but I was wanting to know if it would be worth messing
with for my amateur repeater. I was told that they require a 100%
transmit on the links, but someone else also told me that they could
be used normally as well.
Jordan,
You are correct when you say that, in *standard* configuration, they do
require a 100% status tone on the line. HOWEVER, there was a discussion a
while back about using the SpectraTAC system and modifying it so you didn't
need the status tone to vote... but I can't find where that was
Jordan, Mark, et al,
I have a some of information on the subject of using the Motorola
Spectra-TAC voter in a non-Motorola environment. Unfortunately, this
information exists in many emails and is not a complete representation
of all of the concepts that were discussed in a past thread. That
Hi, Kevin
I'm pretty sure that's how I followed the conversation, too. However,
Jordan was the one who was actually looking for the information on how to do
it.
My system is up and running happily with the status tone - and since the
county radio system is allowing me to piggyback my audio on
Hi Guys,
We run Motorola SpectraTac on all of our systems. I also use some with
normal staus tone operation and some set up for fixed gain with cor from the
link
receivers. These run fine mixed mode in the same comparator. I have the
details on the mods that I came up with for the SQM's if
[EMAIL PROTECTED] wrote:
Hi Guys,
We run Motorola SpectraTac on all of our systems. I also use some with
normal staus tone operation and some set up for fixed gain with cor
from the link receivers. These run fine mixed mode in the same
comparator. I have the details on the mods that I came
Yes please assemble the Spectra Tac info.
I actually have a comparator and receiver shelf on my bench working on a way
to use the two (and more recievers) without the status tone.
I have heard of people inserting the status tone at the link receiver end,
and several other ideas.
So, I
Steve Kometz wrote:
Yes please assemble the Spectra Tac info.
I actually have a comparator and receiver shelf on my bench working
on a way to use the two (and more recievers) without the status tone.
I have heard of people inserting the status tone at the link receiver
end, and several
Hi Kevin,
I found my prints. I have modified schematics and board layouts of the SQM.
I will scan them in the morning at work and try to send them to you.
Glenn W8AK
9 matches
Mail list logo
