Len
Try orienting the yagi horizontally. That should increase side rejection of
the offending signal.
Jeff - - NJ5R
--- On Sun, 9/28/08, n2len [EMAIL PROTECTED] wrote:
From: n2len [EMAIL PROTECTED]
Subject: [Repeater-Builder] UHF LINK ANTENNA QUESTION HELP NEEDED!
To: Repeater-Builder
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of n2len
Sent: Saturday, September 27, 2008 10:00 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] UHF LINK ANTENNA QUESTION HELP NEEDED!
Can anyone please offer me some assistance.
I am
For now I received permission to link directly on their input until
the club installs a remote base and yagi next spring.
There repeater is about 20 air miles away. I am using a 5 element UHF
Yagi about 45 feet up a 170 Rohn 65 at my hub site!
The Yagi is facing due West. The link works
Can anyone please offer me some assistance.
I am trying to link my VHF repeater to a club machine on 440 MHZ.
For now I received permission to link directly on their input until
the club installs a remote base and yagi next spring.
There repeater is about 20 air miles away. I am using a 5
You can try lowering the antenna.
You can try a better antenna, one with a better front to back ratio
and better side lobe rejection.
If that does not work, you can try something that we do to our
microwave dishes when we receive off axis interference, place a
shield near the side of the yagi
repeaters and
links.
Very best of 73,
Russ, W3CH
- Original Message -
From: Tedd Doda [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, March 29, 2004 10:41 AM
Subject: Re: [Repeater-Builder] UHF link
On Mon, 29 Mar 2004 09:31:02 -0500, russ wrote:
We
: [Repeater-Builder] UHF link
Russ, for what it's worth, we're using Johnson 8655 900mhz radios to link
our
2 440 machines together.. One of things we found, and this may apply to
you, is with the 900mhz radios being narrow band and your other stuff
being
wide band, you might hear a noticeable
I doubt if you would get repeater council approval to link at that power
level, most linking is done 15-20 miles with 3-5 watts and then someone
might turn it up to 10 watts to overcome foliage and insure a reliable
path in horrible weather.
dy3lmk143_13mhz wrote:
I've never had experience on
I've never had experience on UHF. any experience how far would a 50
watts UHF link (440 MHz) can get? Antennas would be line of sight and
no obstruction. we planning to link 2m repeaters. Do you have
schematics on how to link repeaters? thanks
Yahoo! Groups Links
* To visit your group
-Original Message-
From: dy3lmk143_13mhz [mailto:[EMAIL PROTECTED]
Sent: Sunday, March 28, 2004 5:39 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] UHF link
I've never had experience on UHF. any experience how far would a 50
watts UHF link (440 MHz) can get
only seven watts!
Richard, N7TGB
-Original Message-
From: dy3lmk143_13mhz [mailto:[EMAIL PROTECTED]
Sent: Sunday, March 28, 2004 5:39 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] UHF link
I've never had experience on UHF. any experience how far would a 50
watts UHF
Line of sight should give you 100 miles with only 5-10 watts. I've done 65
miles with one watt.
Chuck
WB2EDV
- Original Message -
From: Richard [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, March 28, 2004 9:31 PM
Subject: RE: [Repeater-Builder] UHF link
I
Well I don't know how far one can link with 440. However I have a link of 50 miles with 10 watts. Fred KF4QZN - Original Message - From: dy3lmk143_13mhz Sent: Sunday, March 28, 2004 7:39 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] UHF link I've never had
Here in Southern California the surrounding border-areas, there are
several systems with long paths on 420MHz (the same as 440MHz path
behavior). One of the longest is ~165 miles @ 13W before duplexer/feedline
losses. 10-20W is quite typical for links, and 50W is overkill for most.
Most of
repeaters and
links.
Very best of 73,
Russ, W3CH
- Original Message -
From: Tedd Doda [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, March 29, 2004 10:41 AM
Subject: Re: [Repeater-Builder] UHF link
On Mon, 29 Mar 2004 09:31:02 -0500, russ wrote:
We are going
On Mon, 29 Mar 2004 09:31:02 -0500, russ wrote:
We are going to change it from 420
MHz to 927 MHz over the week end of April 4th.
Hi Russ:
What are you using for radios? Also, any foreseen problems
from cordless phones?
Thanks,
Tedd Doda, VE3TJD
Lazer Audio and Electronics
Baden, Ontario,
Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, March 28, 2004 10:31 PM
Subject: Re: [Repeater-Builder] UHF link
Here in Southern California the surrounding border-areas, there are
several systems with long paths on 420MHz (the same as 440MHz path
behavior
17 matches
Mail list logo