-
From: Joel Mele
[mailto:[EMAIL PROTECTED]
Sent: Saturday, April 09, 2005
1:01 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] VHF
preamps
Hello To All:
Does any one have suggestions for a repeater
preamp. 160 Mhz Rcv range and 153 Mhz Xmit range
Joel Mele wrote:
Hello To All:
Does any one have suggestions for a repeater
preamp. 160 Mhz Rcv range and 153 Mhz Xmit range.
I 'd like to find a unit with about 6-9dB gain,
possibly with a preselector.
I am trying to stay away from the Adance
Receiver Research type
Joel,
It is not a simple task to properly apply a preamp at VHF. There's a
lot of noise in the VHF band, not just from man-made sources, but also
from Mother Earth and the sky. This noise pickup is often made worse
when vertically polarized omnidirectional antennas are used.
Almost all manufac
we have used both the UHF and VHF models
form TX-RX and am very happy with them
- Original Message -
From:
Steven
Passmore
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, April 09, 2005 5:28
AM
Subject: Re: [Repeater-Builder] VHF
preamps
I
hip's preamps. Although some
people here consider his UHF preamps to be great but prefer other designs
for VHF.
Steve
- Original Message -
From:
Joel
Mele
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, April 09, 2005 2:00
AM
Subject: [Repeater-Bu
Hello To All:
Does any one have suggestions for a repeater
preamp. 160 Mhz Rcv range and 153 Mhz Xmit range.
I 'd like to find a unit with about 6-9dB gain, possibly with
a preselector.
I am trying to stay away from the Adance Receiver Research
type that runs "wide open" with 24+ d
6 matches
Mail list logo
