[Repeater-Builder] simple lowband rig needed, Maxar, Moxy, etc.

Hi all, Tnx for the previous replies to my xtal calculation question regarding the Maxar 80. Unfortunately, the rig I was getting was grsbbed by someone else, so I am still looking for a Maxar, Moxy or any other high-split radio that will get me on 50.063 Mhz with the least amount of cost or

Re: [Repeater-Builder] simple lowband rig needed, Maxar, Moxy, etc.

KP3FT wrote: > It's for a beacon project, so > receive capability is not needed, only transmit. You still should have rx on it, with an 'interlock' to keep it from keying up on other activity on the freq. -- Jim Barbour WD8CHL

Re: [Repeater-Builder] simple lowband rig needed, Maxar, Moxy, etc.

I know of no Beacon that monitors first. That's why they are called Beacons. They also usually have strict timing requirements in order to enable frequency sharing that any delay in TX would destroy. (Beacon A TXs on the minute, Beacon B at 10 seconds after, Beacon C 10 seconds after that, Etc.) J