Wow
Kb0wlf
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of allan crites
Sent: Friday, February 19, 2010 10:34 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] DB224A new harness
Tom,
Perhaps you could
e curve vs. freq. for the range 220-225 MHz
or whatever you measured?
There are no "loops" on a DB224, only folded dipoles. Loops are circular,
dipoles are linear.
Allan Crites WA9ZZU
--- On Fri, 2/19/10, Tom Manning wrote:
From: Tom Manning
Subject: Re: [Repeater-Builder] DB224A new
- Original Message -
From: allan crites
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, February 18, 2010 5:47 PM
Subject: Re: [Repeater-Builder] DB224A new harness
Tom
I would certainly be interested in knowing just how a 150-162 MHz DB224
could be
Subject: Re: [Repeater-Builder] DB224A new harness
Hello Andrew and Norm
If you are trying to figure out the lengths needed for 144-148Mhz I can
measure what you need to know but not in a hurry. I have a DB products
antenna that is cut for the two meter band that I ordered from DB
anage this?
Allan Crites WA9ZZU
--- On Thu, 2/18/10, Tom Manning wrote:
From: Tom Manning
Subject: Re: [Repeater-Builder] DB224A new harness
To: Repeater-Builder@yahoogroups.com
Date: Thursday, February 18, 2010, 4:58 PM
Hello Andrew and Norm
If you are trying to figure out t
10 10:35 PM
Subject: RE: [Repeater-Builder] DB224A new harness
The unknown coax type is/was VB-83 (35 ohm). The VB-8 is of course 50 ohm and
the VB-11 is 75 ohm.
I hope that is the info you needed. It would be great if you could figure out
what the open stub is for and can we use tha
@yahoogroups.com
To: Repeater-Builder@yahoogroups.com
Sent: Thu Feb 18 08:49:47 2010
Subject: RE: [Repeater-Builder] DB224A new harness
Norm
I need you to do two more things:
1) Tell me where the measurements of the lengths of the coax were made to,
were they to the edge of the molded tee block
m the coax types shown on your diagram?
a.
--- On Wed, 2/17/10, NORM KNAPP wrote:
From: NORM KNAPP
Subject: RE: [Repeater-Builder] DB224A new harness
To: Repeater-Builder@ yahoogroups. com
Date: Wednesday, February 17, 2010, 3:57 PM
I got the harnesses at no charge from Andrew. I contacted cu
From: Repeater-Builder@yahoogroups.com on behalf of allan crites
Sent: Wed 2/17/2010 9:29 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] DB224A new harness
I tried to work backwards on a Smith Chart from the dipole to the 1/2 WL O.C.
stub to
wrote:
From: NORM KNAPP
Subject: RE: [Repeater-Builder] DB224A new harness
To: Repeater-Builder@yahoogroups.com
Date: Wednesday, February 17, 2010, 3:57 PM
I got the harnesses at no charge from Andrew. I contacted customer support and
told them I had 3 fairly new DB224's (2 a models an
I got the harnesses at no charge from Andrew. I contacted customer support and
told them I had 3 fairly new DB224's (2 a models and a b model) that had water
intrusion/contamination in the harness where they were supposedly seal by the
factory. I offered pictures and they accepted. Upon seeing t
> I just recieved 2 new DB224A harnesses from Andrew. They were
> made in Mexico (no surprise there, they have been making them
> there for some time).
Curious if you had any problems ordering them, and if I may ask, what did
they run you?
> I need it to work on
> 147.225/147.825. I got a 1.6
12 matches
Mail list logo
