Marcin Bukat wrote:
Hello all rockbox-dev.
I am in process of porting rockbox to Mpio HD200 device. It is coldfire
based DAP. It has some unpopulated 20 pin connector on PCB which I think
is BDM connector. The problem I am facing is that I can't find supplier
for needed 20pin raster 0.3mm SMD
Linus Nielsen Feltzing wrote:
Give me your address and I'll send you one. Do you need anything more?
Ehum, maybe I was too fast. Are you sure it is 0.3mm???
Linus
pondlife wrote:
Slightly hijacking this thread, does the H300 BDM interface have a
connector? I assumed it was a soldering job, but if it's pluggable, I plan
to buy a wiggler!
Unfortunately, the BDM connector on the H300 is not mounted, so you need
to solder a ZIF connector to be able to
Unfortunately, the BDM connector on the H300 is not mounted, so you need
to solder a ZIF connector to be able to connect it. Furthermore, it is not
a standard BDM connector, so you need to build an adapter as well.
And I guess that such a connector wouldn't fit it inside the snug H300 case?
I am not. I may be 0.5 mm as well. I can't measure pitch properly.
2009/11/23 pondlife pondl...@ntlworld.com
Hi Linus,
Slightly hijacking this thread, does the H300 BDM interface have a
connector? I assumed it was a soldering job, but if it's pluggable, I plan
to buy a wiggler!
pondlife
I am terribly sorry. I measured pitch of the connector against lm339 on the
photo and connector is standard 1.0 mm pitch. This one is easy to get. Sorry
again.
Anyway - Linus can You confirm H300 uses 20pin 1.0mm pitch connector - from
photos it looks exactly the same as in HD200.
2009/11/23
Marcin Bukat wrote:
I am terribly sorry. I measured pitch of the connector against lm339 on
the photo and connector is standard 1.0 mm pitch. This one is easy to
get. Sorry again.
Anyway - Linus can You confirm H300 uses 20pin 1.0mm pitch connector -
from photos it looks exactly the same as in
I am measuring pitch on the photo and compare to datasheets for other parts
on the photo and I am quite confused. 0.5 mm sounds resonable looking at my
own eyes on PCB but measuring on the photo I am not such sure :/ I think
20pin 0.5mm is available in local electronic store. First I will try this