/)
From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of
Ahmed Hassan
Sent: Tuesday, May 08, 2007 12:41 PM
To: Servers Alive Discussion List
Subject: Re: [SA-list] SNMP - Monitoring UPS
Hi Micheal,
Thanks for the tip - it&#
List
Sent: Monday, 7 May, 2007 1:35:15 PM
Subject: RE: [SA-list] SNMP - Monitoring UPS
That is the TRAP OID for a status of "OnBattery". GetIf shows this by putting a
# symbol after the group name in the OID tree. In this case it shows "apc#".
The
-
From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of
Ahmed Hassan
Sent: Friday, May 04, 2007 7:06 AM
To: Servers Alive Discussion List
Subject: [SA-list] SNMP - Monitoring UPS
I am trying to use SAlive to monitor my AP9619 UPS with the OID
.1.3.6.1.4.1.318.0.5, s
It's been a while, but if I remember correctly you need to add a .1 to the
end of the OID. I have mine as 1.3.6.1.2.1.2.2.1.8.1 <- the .1 was added.
I don't have the ups any more so I can't check.. Sorry
At 01:05 PM 5/4/2007 +0200, you wrote:
I am trying to use SAlive to monitor my AP9619
To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu
If you use auto-responders (like out-of-the-office messages), then make sure
that they are not send to the list nor to the individual members of the list
that send a message. Doing this will get you removed from t
I am trying to use SAlive to monitor my AP9619 UPS with the OID
.1.3.6.1.4.1.318.0.5, so that I can be alerted when the UPS switches to
battery backup power. But I keep getting the erorr " No Such Name" . My
question is what value do I put in the field "alert when the result "...
My
