Depending on the final cost, then you can put me down for a kit.
Bob Wilkinson.
-Original Message-
From: Andrew Gale <[EMAIL PROTECTED]>
To: sam-users@nvg.ntnu.no
Date: 09 May 2000 14:39
Subject: Re: PC keyboard interface
>> You could remove the old ribbon connector and put pins in. Or
> Havn't had many responses yet for my SAM coupe screen viewer
> or ideas for a diskimage manager.
>
> Did any of you give it some thoughts ?
Yep, it's very nice indeed.
Things I'd like to see:
x2 zoom for screen image.
Support for Lord Insainity Screen cruncher
Support for MODE3
As for the D
> You could remove the old ribbon connector and put pins in. Or even
> better, if a connector can be found with the same pinout as the original,
> then, as long as a mating plug can be found. that could do it.
Yes, I'd been thinking about this and flicking through various
catalogues - the only pro
Havn't had many responses yet for my SAM coupe screen viewer or ideas for a
diskimage manager.
Did any of you give it some thoughts ?
Edwin Blink
[EMAIL PROTECTED]
http://home.wanadoo.nl/blink/samcoupe/index.htm
How many of you have a comms interface ?
(the one with a RS232 connector)
If so did you every use it and did you have
problems with it ?
(If so what where they ?)
I hadn't any problems with a 56K6 interrupt driven remote loopback.
But just want to make sure I didn't forget something.
[EMAIL PR
>Where can you get the edge connectors from?
A alternative could be by using breakable male headers
the same type as used as a IDE connector on cheap PC motherboards but only
single row.
You can buy then as 1x40 pins. Use two of them to get the A and C rows.
This is not the best method but sure
Dnia 00-05-08 Justin Skists pisze:
> Where can you get the edge connectors from?
Perhaps? (This is 3 years old.)
HARTING Elektronik GmbH
Postfach 1140, D-32325 Espelkamp
Marienwerderstraße 3, D-32329 Espelkamp
HARTING Elektronik Ltd.
Northampton, NN 47 PW
Catalog No. 09 03 164 7 921
--
Yarek.
