Dear Thomas,
I'm sorry for lack of my explanations.
- Original Message -
From: "Thomas Loescher"
To:
Sent: Tuesday, September 21, 2004 6:46 AM
Subject: Re: [sane-devel] Problems with scsi filmscanner canon2700
> why I should try this old modul (http://www.rzg.mpg.de/~mpd/sane/)?
> sane
I can't scan with Epson Rx500 Multifunction scanner.
On my Mandrake 10.0 after adding vendor and product ID (usb 0x4b8
0x0807) in 'epson.conf' it is recognized but when I try scanimage it
gives
me:
scanimage: sane_start: Operation not supported
I have tried:
# SANE_DEBUG_EPSON=128 scanimage
This
I can't scan with Epson Rx500 Multifunction scanner.
On my Mandrake 10.0 after adding vendor and product ID (usb 0x4b8
0x0807) in 'epson.conf' it is recognized but when I try scanimage it
gives
me:
scanimage: sane_start: Operation not supported
I have tried:
# SANE_DEBUG_EPSON=128 scanimage
This
On Tue, 2004-09-21 at 20:15, Oliver Schwartz wrote:
> I don't think so - if it works on Windows it's unlikely to be a
> hardware problem.
>
> Did you change the firmware entry in snapscan.conf to point to the
> correct firmware file?
yes, it should be the correct firmware.
# Change to the fu
Hi,
it might well be that the firmware of the V310 doesn't understand the commands
for shadow and highlight operations. The firmwares of the different microtek
scanners have different peculiarities and that's why this isn't very easy to
handle in the code (microtek has a unique driver for each s
HI,
thank you very much for this long and good explanation.
Unfortunately and this is REALLY strange I can't find anymore a working
version of sane for me.
I tried version 1.0.12, 1.0.13, 1.0.14 on Kernel 2.4.22, 2.4.24 and 2.4.26.
This is a behaviour, I don't understand.
I will test my scanner
Hi,
> Yes, the lamp is on, and when acuiring a preview, the `arm' is on
> the top of the scanner and seems finished with the job.
>
> is this error of such a kind that i can bring the scanner back to
> the shop and aquire a new one? seems like a hardware error to me.
I don't think so - if it work
Bertrik Sikken wrote:
> Adam Bogacki wrote:
>
>> Having got XSANE working, I have two problems.
>>
>> (1) I installed hotplug with permissions to allow user access after
>> hotplugging.
>> That works. However a problem arises when using Applications ->
>> Graphics -> XSane as user,
>> XSane tell
Karl Heinz Kremer writes:
> On Sep 20, 2004, at 12:03 PM, Dan Christian (by way of Dan Christian
> ) (by way of Dan Christian )
> wrote:
>
>> This used to work (under FC1/2.4), but no longer does under Fedora Core
>> 2 (Linux 2.6). I'm running sane-backends-1.0.14-3 on an Athlon (single
>> proce
Havard,
Please take a look at a web page I wrote on how to install the
Perfection 1670, which includes some troubleshooting hints. Let me know
what the problem was and how you fixed it and I will include those
comments in the next draft of the page.
Sincerely yours,
Jeff Silverman
ht
Hi.
Yes, the lamp is on, and when acuiring a preview, the `arm' is on the
top of the scanner and seems finished with the job.
is this error of such a kind that i can bring the scanner back to the
shop and aquire a new one? seems like a hardware error to me.
thanks again,
bests,
havard
On Wed,
I am sorry for the problem, but it appears that the
introduction of focus controls for the Canon FS2710
somehow disrupted the focus controls for the FS2700.
Unfortunately, I do not have an FS2700, and so I
cannot test the backend for this scanner.
If you say that sane version 1.0.13 worked for you
Hi,
On Tue, 21 Sep 2004 08:34:26 +0200 (METDST)
Ulrich Deiters wrote:
> I am sorry for the problem, but it appears that the
> introduction of focus controls for the Canon FS2710
> somehow disrupted the focus controls for the FS2700.
> Unfortunately, I do not have an FS2700, and so I
> cannot tes
13 matches
Mail list logo
