Hello friends,
I'm very happy that I find my HP 7400c - avision backend - fully
functional at my ubuntu 16.10 box again. Just adding
ppa:rolfbensch/sane-git and updating the system/sane did the trick.
Up to now no single failure - coloured or b&w, single or multiple pages
- everything works fine.
All,
Upgraded to Ubuntu 12.04. And was using gscan2pdf when I realized that I
could not scan in any other mode than color. Previous version, 10.04
Ubuntu, I could scan in all three modes, color, line art & gray scale.
This does not appear to be the case with the sane-backend 1.0.22
installed.
On Mon, Aug 17, 2009 at 11:16 AM, Mark Szorady wrote:
> Hi, I dson't mean to instrude,
You are not intruding, this is why we are here!
> but I'm trying to get my HP 8250 scanner to work with Sane. ?I'm using
> PCLinuxOS 2009.2. ?The backend they have is 1.0.19. >?the scanner works with
> p[revi
Hi, I dson't mean to instrude, but I'm trying to get my HP 8250 scanner to work
with Sane. I'm using PCLinuxOS 2009.2. The backend they have is 1.0.19. the
scanner works with p[revious backend versions. for instance, it works using
backne 1.0.14 in LinuxMint 4.0.
I'm wondering if the supp
On Tuesday 08 May 2007 20:28:04 Robin Stewart wrote:
> Dear Rene
>
> I have been having some correspondence with Allan Noah on the sane devel
> mailing list. It concerns my Visioneer Strobe XP 450 which I have not
> been able to use with sane or xsane. Allan suggests below that I send
> you the
On 5/8/07, Robin Stewart wrote:
> I appreciate you support and I am trying to follow your instructions but
> at the time I could not do so because I did not know how to access the
> root with the passwords that I remembered.
if you intend to admin a unix or unix-like machine of any type, you MUST
Allan
It is not that I can not read carefully, but that I had found that the
su command could not be run due to my only password being rejected. I
therefore hoped that sudo would do and that is why I spelt out that I
had used sudo not su. I had been given advice to use sudo in another
situati
On Tuesday 08 May 2007, Julian Stacey wrote:
> > When I run su and put in my login password it is rejected as an
> > authentication failure. When I use the same password in sudo, it works!
> > Do you have a work around?
>
> Maybe sudo doesnt check if your UID is in group 0 in /etc/group.
> whereas
my god you are hard to help. i have to repeat EVERY message?
"...(give root password)..."
allan
On 5/7/07, Robin Stewart wrote:
> Allan
>
> When I run su and put in my login password it is rejected as an
> authentication failure. When I use the same password in sudo, it works!
> Do you have a w
Robin Stewart wrote:
> Allan
>
> When I run su and put in my login password it is rejected as an
> authentication failure. When I use the same password in sudo, it works!
> Do you have a work around?
Maybe sudo doesnt check if your UID is in group 0 in /etc/group.
whereas su does check & bounce
Allan
When I run su and put in my login password it is rejected as an
authentication failure. When I use the same password in sudo, it works!
Do you have a work around?
Robin
The above comments are in response to m. allan noah's email of 07/05/07
18:18 as quoted below:
> try this:
>
> su -
try this:
su -
(give root password)
you now have a root shell.
then run the command i gave. logout of root shell when done.
allan
On 5/7/07, Robin Stewart wrote:
> Thank you very much for your help.
>
> I assume that running it as root means putting sudo in front.
>
> I can not run the comma
Thank you very much for your help.
I assume that running it as root means putting sudo in front.
I can not run the command:
sudo SANE_DEBUG_AVISION=7 scanimage -L
it gives a command not found error.
Robin
The above comments are in response to m. allan noah's email of 07/05/07
17:36 as quoted
--
Find out how you can get spam free email.
http://www.bluebottle.com
-- next part --
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20070507/ef5ffba3/attachment.ht
.de (=?utf-8?q?Ren=C3=A9_Rebe?=)
Date: Fri Jan 27 07:24:22 2006
Subject: [sane-devel] avision backend support of HP 8250
In-Reply-To: <2612273.p...@talk.nabble.com>
References: <1134512448.24599.252.camel@localhost.localdomain>
<1134596918.24599.301.camel@localhost.localdomain&g
On Wed, Dec 14, 2005 at 11:48:37PM +0200, Antti Andreimann wrote:
> However all this still does not explain why the scanner does not work
> with stable version of SANE. And why it only works when 3x3 matrix send
> is disabled in latest CVS. I tried to copy backend/avision* to
> sane-backends 1.0.16
?hel kenal p?eval, K, 2005-12-14 kell 11:26, kirjutas Ren? Rebe:
> > The only way I got this scanner to sort of work was with the CVS
> > snapshot from 2005-12-12 when I commented out a 3x3 matrix send like
> > this:
>
> Please be specific - what do you mean with "sort of work"? Flatbad
> scanni
Hi,
On Tuesday 13 December 2005 23:20, Antti Andreimann wrote:
> The only way I got this scanner to sort of work was with the CVS
> snapshot from 2005-12-12 when I commented out a 3x3 matrix send like
> this:
Please be specific - what do you mean with "sort of work"? Flatbad
scanning in all mod
I have exactly the same problem with this scanner.
It just does not work. Scanning hangs no matter what I set in
avision.conf.
Here is a piece of log:
[avision] send_3x3_matrix:
[avision] send_3x3_matrix: sending matrix
[sanei_usb] sanei_usb_write_bulk: trying to write 28 bytes
[sanei_usb] :
Hi,
On Mon, Oct 03, 2005 at 03:58:16PM +0300, Anastas Giokov wrote:
> [sanei_usb] sanei_usb_read_bulk: trying to read 2 bytes
> [sanei_usb] : 00
>
> [sanei_usb] sanei_usb_read_bulk: wanted 2 bytes, got 1 bytes
Maybe the problem is
Hi!
On 10/3/05, Henning Meier-Geinitz wrote:
> Hi,
>
> On Mon, Oct 03, 2005 at 01:57:37PM +0300, Anastas Giokov wrote:
> > How can I look at the actual communication between the backend and the
> > scanner? I'd like to debug further if anybody has an idea where to go
> > next.
>
> export SANE_DEB
Hi,
On Mon, Oct 03, 2005 at 01:57:37PM +0300, Anastas Giokov wrote:
> How can I look at the actual communication between the backend and the
> scanner? I'd like to debug further if anybody has an idea where to go
> next.
export SANE_DEBUG_SANEI_USB=255
Comment everything but "avision" in dll.con
I have recently bought an HP 8250 scanner and tried to use it with
sane. Although the scanner support is marked as "good" it hangs when
trying to communicate with it.
scanimage -L recognizes device as 'avision:libusb:005:003' as a 'HP
ScanJet 8200 flatbed scanner'
scanimage -T hangs after turning
Hi,
On Mon, Jun 09, 2003 at 06:42:08AM +0100, F J Brooks wrote:
> On Sat, 31 May 2003 09:15:11 +0200, Henning Meier-Geinitz
>
> wrote:
> > So an older version of xsane works? The current version is 0.91, by
> > the way.
>
> Is there any advantage to me in installing xsane 0.91, eg, will it solve
Hi,
Hey, I just want to help and know what should be fixed in SANE. No
oofense intended :-) Keep in mind that I (and quite a lot of others on
this list) are not native English speakers so the meaning of my words
may be a bit different from what I write.
On Wed, May 14, 2003 at 08:58:16PM +0100, F
Thanks for the info. Will go see what additional info is there
Marcio Luis Teixeira wrote:
> > Also Does anyone have ANY copy of ANY Avision scsi/usb command
> > information for ANY Avision scanner.
>
> A while back someone posted a great deal of information about the
> Avision scanners on my UMA
Security_Multipart(Wed_Jan_16_23:01:20_2002_627)--
Content-Type: Text/Plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
From: Henning Meier-Geinitz
Subject: Re: [sane-devel] Avision Backend (HELP Need a copy of source)
Date: Wed, 16 Jan 2002 22:52:48 +0100
>
Hi,
On Wed, Jan 16, 2002 at 10:55:07AM -0500, Kent Swan wrote:
> I cannot seem to find a live site which has the Avision Sane back end on
> it.
If you are talking about the USB changes:
http://www2.rocklinux.org/people/rene/sane/
"www" doesn't seem to work for me, only "www2".
Otherwise, Rene
Security_Multipart(Wed_Jan_16_22:25:54_2002_998)--
Content-Type: Text/Plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
From: Kent Swan
Subject: [sane-devel] Avision Backend (HELP Need a copy of source)
Date: Wed, 16 Jan 2002 10:55:07 -0500
> I cannot seem to find a l
> Also Does anyone have ANY copy of ANY Avision scsi/usb command
> information for ANY Avision scanner.
A while back someone posted a great deal of information about the
Avision scanners on my UMAX WikiWiki. I'm not sure if the info
is useful to you or not. The UMAX WikiWiki is here:
http://um
I cannot seem to find a live site which has the Avision Sane back end on
it. Can anyone help by sending me a latest (that you have) zipped copy
of the source code. We are working on a number of HP backends and want
to sort out the 5200 and 7400 units.
Also Does anyone have ANY copy of ANY Avision
Hi all.
So. I'm back with active development for the sane/avision-backend ...
Attached is a slightly modified avision.c (patch against sane-1.0.6).
It doesn't yet do the software color-packing ... - But it includes
all vendor strings I was able to find, outputs some scanner parameters
in a readab
32 matches
Mail list logo
