Le 18/07/2013 19:08, Rolf Bensch a ?crit :
> Hi Albert,
>
> Please be patient 'til tomorrow. My ppa uses the daily git snapshot file
> from the sane website. Stef's commits will be available with the next
> snapshot.
Thanks a lot Rolf!
> Cheers,
> Rolf
Amicalement,
--
Albert.
Hi Albert,
Please be patient 'til tomorrow. My ppa uses the daily git snapshot file
from the sane website. Stef's commits will be available with the next
snapshot.
Cheers,
Rolf
Am 18.07.2013 10:20, schrieb Albert ARIBAUD:
> Le 18/07/2013 08:50, Stef a ?crit :
>> Hello,
>>
>> thanks for
Le 18/07/2013 08:50, Stef a ?crit :
> Hello,
>
> thanks for an hardware donation from Dany Qumsieh, I have been able
> to work on better support for the LiDE 210. I have improved scanning
> speed at resolution below 600 (saving about 8s), and in the process
> improved darkness issue with
Hello,
thanks for an hardware donation from Dany Qumsieh, I have been able
to work on better support for the LiDE 210. I have improved scanning
speed at resolution below 600 (saving about 8s), and in the process
improved darkness issue with this scanner (#313886).
Incorrect gray
Hello,
I have updated the genesys backend. The changes bring improvements
to LiDE 35 support, and experimental support for uncalibrated 100 scan
for both Canonscan 8400 and 4400F, which are GL843 based.
Regards,
Stef
Hello,
I have just pushed a new version of the genesys backend. It brings
support for G4010/G4050 up to 2400 dpi. 4800 dpi is a special thing for these
models, and I will look into it once I have finished support for their UTA.
There is still some room to improve calibration and
Hello,
I have updated the genesys backend. It brings 2400 dpi for LiDE 100 and
4800 dpi for LiDE 200. 4800 dpi shading calibration has yet to be fixed.
Lineart needs also to be corrected when resolution is higher than 600 dpi.
Regards,
Stef
Le Friday 17 December 2010 14:15:04 maitland, vous avez ?crit :
> stef free.fr> writes:
> > Hello,
> >
> > with the latest git version of the genesys backend Canon LiDE 100 is now
> >
> > completely supported, and also the LiDE 200 which is only missing 2400
> > dpi resolution. I'm c
Le Friday 17 December 2010 14:15:04 maitland, vous avez ?crit :
> stef free.fr> writes:
> > Hello,
> >
> > with the latest git version of the genesys backend Canon LiDE 100 is now
> >
> > completely supported, and also the LiDE 200 which is only missing 2400
> > dpi resolution. I'm c
stef free.fr> writes:
>
> Hello,
>
> with the latest git version of the genesys backend Canon LiDE 100 is
> now
> completely supported, and also the LiDE 200 which is only missing 2400 dpi
> resolution. I'm currently working on 2400 dpi support and it should be
> available in a
Hello,
I have updated the genesys backend for LiDE 110 support. Lide 210
support
may be easy to add. For that I need an usb log done after a fresh plug when
doing a 'test scanner' within the 'preferences' menu of scangear.
The backend will have to be built from sources i
Hello,
I have committed build 30 of the genesys backend which brings support
for
the Panasonic KV-SS080 flatbed scanner. It is a GL843 based. There are also
some early elements for the HP G4050. I expect to have basic support done for
this one this year. Then UTA support will
Hello,
with the latest git version of the genesys backend Canon LiDE 100 is
now
completely supported, and also the LiDE 200 which is only missing 2400 dpi
resolution. I'm currently working on 2400 dpi support and it should be
available in a couple of weeks.
Bug
Hello,
I have made some progress regarding the HP3670. 150 and 300 dpi modes
are now
working uncalibrated. Since this model is really close to the HP2400/G2410, it
is now worth testing these models with this update. I expect the 50 dpi mode
to work uncalibrated.
The nex
Hello,
I have committed an update to the genesys backend which brings the
following
features for gl646 based scanners:
- shading calibration fix leading to much improved scan quality over
previous
releases.
- shading calibration for sheet-fed scanners,
On Tuesday 03 March 2009 14:22:01 Jack McGill wrote:
[SNIPSNAP]
> Also, I made a table that summarizes the small, usb powered, mobile sheetfed
> scanners at
> http://sites.google.com/site/roadwarriorscanner/sheetfed-scanner.
Jack,
I can confirm that the Scanshell 800 is LM98xx based, the IDs ar
Thank you, Gerhard
Jack McGill
--- On Wed, 3/4/09, Gerhard Jaeger wrote:
> From: Gerhard Jaeger
> Subject: Re: [sane-devel] genesys backend update
> To: sane-devel at lists.alioth.debian.org, jmcgill85258 at yahoo.com
> Date: Wednesday, March 4, 2009, 12:23 AM
> On Tuesday 0
canners at http://sites.google.com/site/roadwarriorscanner/sheetfed-scanner.
Jack McGill
--- On Mon, 3/2/09, Pierre Willenbrock wrote:
> From: Pierre Willenbrock
> Subject: [sane-devel] genesys backend update
> To: sane-devel at lists.alioth.debian.org
> Date: Monday, March 2, 2009,
Hi,
i added support for Ambir(Syscan) DocketPort 665 and Visioneer
Roadwarrior, thanks to the hardware donation of Jack McGill. Those two
use the same mainboard, only differently sized sensors. There may be
other models using this mainboard, and adding support should be simple.
Attached is a photo
Hello,
I have committed a rewrite of the gl646 part of the genesys backend. It
brings a better calibration process. Untested support for the HP3670 thanks
for extensive usb sniffing done by Martijn ter Schegget. There is also
limited support for HP2400 (50, 300 and 600 dpi colo
> --- On Sun, 2/8/09, Pierre Willenbrock wrote:
>
>
>>
>> PS1: don't try to test this on current cvs -- at least
>> for me, it
>> creates libsane-*.so.0.1.0, instead of libsane-*.so.1.1.0.
>>
I originally missed your PS. This appears to be related to my reverting
part of the backend/Mak
Stef and Pierre,
Good work! I have an XP200 and it seems to be working well. I don't have
another XP300 to test out.
Jack McGill
--- On Sun, 2/8/09, Pierre Willenbrock wrote:
> From: Pierre Willenbrock
> Subject: Re: [sane-devel] genesys backend update
> To:
Hello,
stef schrieb:
> the genesys backend as been updated. Thanks to an hardware donation of
> Jack
> McGill, there is now support for the sheet-fed Visioneer Strobe XP200. It can
> scan at 75, 100, 200, 300 and 600 dpi in color or gray and at 8 or 16 bits.
> Scans are uncalibrated, ie
Hello,
the genesys backend as been updated. Thanks to an hardware donation of
Jack
McGill, there is now support for the sheet-fed Visioneer Strobe XP200. It can
scan at 75, 100, 200, 300 and 600 dpi in color or gray and at 8 or 16 bits.
Scans are uncalibrated, ie there is no sh
Le Mercredi 7 D?cembre 2005 10:06, Gerald Murray a ?crit?:
> Stef:
>
> Thanks for your comment on the "no warmup will succeed" area. I had
> not thought about that. I will continue working on it, my pace is
> rather slow, and I am missing the log that would show values to test/try
> in the regi
Hi all,
# These tests results are using sane-backends-20051206-cvs:
GL841 - Canoscan lide35:
This has changed for the worse since Nov 24.
I have previously made scans at 150, 300, 600, in color.
Now the 'image' is no longer recognizable.
color, 75dpi, (scan fails, obtaining 0 feed steps, then s
Hello,
I have some questions again on HP2400 current development. How you
people are checking code? i mean i have also same code(
sane-backends-2005-12-06.tar.gz & sane-frontends-2005-12-06.tar.gz) but
neither scanimage -L is recognising nor Xsane detects it.
then how can i check whatever featu
Hi all,
Seems like the mailing system on haydn had an outtime. At least the cvs
commit mails didn't arrive here, and i couldn't send this mail the first
try.
I updated the genesys backend in cvs. It is in sync with experimental
cvs now again.
If you own a genesys based scanner which should be su
28 matches
Mail list logo