I've changed the fuel filter, all fuel injectors, check fuel pressure at 55
psi. Goes down to 50 When I rev the engine. I changed the computer. Does
anyone know where I can get the wiring diagram on the smec computer. I have
a haynes book and it only has the wiring diagram with the old logic
First thing I would do is open up the bottom of that engine, with a plan to
at minimum replace the pan and pickup.
If the balance shafts are out of the motor I would try to get a pan and
pickup from a commonblock 2.2l. (these can generally be found in later modem
92/93
base P bodies) and actuall
The oil pump to block mounting is probably leaking air. So when the
oil is lower or after the filter change it can't get enough suction
to pull the oil up. (Had this once). Pull the oil pan and remove the
oil pump. Seal it with anerobic sealer where it mounts to the block.
While I was in th
