Mike,
I have done some repairs to cars with your Aunt's cars symptom. Has the car
been checked with a scanner to see if the SMEC is seeing/ receiving a signal
from the speed /distance sensor? I have found there is a splice in the wire
from the s/d sensor to the SMEC that goes to the speedomete
Hello again everyone. I just decided it was time to put a bigger cam in the old
rampage since I had the valve cover off (bored mostly). I have an '87 glhs
motor in the rampage that has a roller-cam. This is part of the problem, it has
been so long that I dont remember where I got the cam or its
This link should give you all the information you need. Also, on the one male
heim joint, if you get it metric sized it will screw right into the female rod
end. It cost me a little more but to me it was worth the time saved. I think
it was 10mm x 1.25, just unscrew the end and if you have a goo
Hello
I have an 87 GLHS #138 in PA, good shape , many after market parts. Looking
to sell it for, half of what I have in.it. 7000 firm. I don't use it much, I
just what it to go to a nice home. ( I don't NEED to sell it, just would like
someone to use it.) E-mail or call 610 266 - EST
-
I'm beginning to think everyone on the list has a half a dozen 6-bolt
manual tranny flywheels sitting in their garage. Thanks again for
everyone who got back to me.
I also found a source for new/refurbed 6-bolts. Thought I'd post it for
future reference:
Hey we have plenty
Part # 3404