mer
> Cc: shelby-dodge@imagicomm.com
> Sent: Sunday, April 09, 2006 12:15 PM
> Subject: Re: SD> Engine Torques Breaking CV boot band
>
>
> I had that problem once. It was a snapped bolt that went through the
> passenger side motor mount.
>
> On 4/9/06, Ron Zimmer <
s Breaking CV boot band
Yeap Brian I've seen that a few times too.
- Original Message -
From: Brian Schulteis
To: Ron Zimmer
Cc: shelby-dodge@imagicomm.com
Sent: Sunday, April 09, 2006 12:15 PM
Subject: Re: SD> Engine Torques Breaking CV boot band
I had that prob
Yeap Brian I've seen that a few times too.
- Original Message -
From: Brian Schulteis
To: Ron Zimmer
Cc: shelby-dodge@imagicomm.com
Sent: Sunday, April 09, 2006 12:15 PM
Subject: Re: SD> Engine Torques Breaking CV boot band
I had that problem once. It was a snap
I had that problem once. It was a snapped bolt that went through the
passenger side motor mount.
On 4/9/06, Ron Zimmer <[EMAIL PROTECTED]> wrote:
> Hey my engine moves causing the CV boot band to strike the frame on the
> passenger side CV. Motor mounts must need adjusting but how?
> I am thinking
Ron,
Order a complete set of mounts from Johnny - www.polybushings.com that will
take care of the engine movement problem and also improve drive-ability
significantly too. I think he has instructions on his site about how to
center the engine.
Marc
www.marcmedina.com
-Original Message-
Fro