I am planning on working the shifter connection on my A525 Omni GLHT
this weekend. I purchased the heim joints and hardware needed for the
job. I have a spare set of shift rods which I have already threaded
with 3/8-24. I plan on using the stock set of rods in the car for
length and alignment pu
al Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robert Carita
Sent: Thursday, November 25, 2004 3:14 PM
To: [EMAIL PROTECTED]
Subject: SD> Heim Joint Shifter on A525 Omni GLHT
I am planning on working the shifter connection on my A525 Omni GLHT
this weekend. I
and finish the job Sat.
-- Forwarded message --
From: Mullikin, Stefan P <[EMAIL PROTECTED]>
Date: Fri, 26 Nov 2004 20:41:15 -
Subject: RE: SD> Heim Joint Shifter on A525 Omni GLHT
To: Robert Carita <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
Pop the C-clips o
Before the rain started falling this afternoon, I finished up the
conversion. I did run into some problems and may need to do a bit
more tweakingbut things are driveable now.
After installing the reworked rods and swing arms, I went to remove
the alignment pin in the A525 shift selector housi
bject: Fwd: SD> Heim Joint Shifter on A525 Omni GLHT
Before the rain started falling this afternoon, I finished up the
conversion. I did run into some problems and may need to do a bit more
tweakingbut things are driveable now.
After installing the reworked rods and swing arms, I went to re
