Im getting no spark at all. The car has been running fine, then I
changed out injectors with new Mopar Performance +20s, and now I have no
spark.
Here is how things went down
Install injectors and AFPR, go to start car...nothing...check every
thing I did againstill nothing
Check for
Chris,
Well, you changed a lot of parts but really walked around the possible
problem. Have you checked for power at the coil when cranking the car over?
There
should be batter voltage at the positive side of the coil when cranking. Same
voltage should be at the injectors, fuel pump too.
The
Do you have the cts/injector/knks wiring ground wire connected to the
passenger side fuel rail bolt?
- Original Message -
From: Chris Holmes [EMAIL PROTECTED]
To: SDML shelby-dodge@sdml.org
Sent: Sunday, April 17, 2005 11:55 PM
Subject: SD No Spark 89 CSX tried every thing.
Im getting
Did you have your ground strap hooked up to the firewall when you tried
it the first time? If not, you may have fried the logic module. I
found that out the hard way myself. That ground will cause major
problems if its not connected or had a rusty connection. After the LM
gets fried, it
