David,
Try.http://www.bramptontechnology.com/adhesives.html
It is called Pro-Fix Rattlestop, I have not tried
it yet but apparently it works very well.
I have used other Brampton products with great
results.
Regards,
Charlie W.
- Original Message -
From:
[EMAIL PROTECTED
Jeff,
Apparently there is a new product by " Brampton "
called "rattle remover"..it adds only a couple of grams to total weight. It is a
spray.
Regards,
Charlie W.
- Original Message -
From:
Hayes,
Jeff
To: [EMAIL PROTECTED]
Sent: Wednesday, Dec
Thanks Ed,
It appears that the idea has some merit and there is no components ( at
least yet )
available unless you make some modificationsthe issue is the weight, lie
and the offset.
Regards,
Charlie W.
- Original Message -
From: "Ed Reeder" <[EMAIL PROTECTED]>
To: &
To All,
Any comments /discussions on The Perfect
Club? http://theperfectclub.com/about_the_club/index.asp
Has anyone tried it.anything else on the
market/component that is similar?
Regards,
Charlie W.
WEBWORKS
Bernie,
Wishing you a quick recovery.we miss you, get
well quick.
Best Regards,
Charlie W.
- Original Message -
From:
Bernie
Baymiller
To: Shoptalk
Sent: Friday, November 15, 2002 11:08
AM
Subject: ShopTalk: Kidney
transplant
Just a note to all of those
John,
Any idea on the specs for the 300 cc...you indicated a deep face, what is
the face height, what lie and is it open or closed?
Thanks,
Charlie W.
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, November 03, 2002 9:24 PM
Subject: ShopTal
Thanks Ed.I will have to try the Accuflex Vision shaft and compare with
the SK Fiber Rev Lite.
Regards,
Charlie W.
- Original Message -
From: "ED" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, October 23, 2002 9:03 PM
Subject: Re: ShopTalk: ReMax Lo
Dean,
I responded to you directly to: [EMAIL PROTECTED]
Regards,
Charlie W.
- Original Message -
From: "Dean" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 22, 2002 7:53 PM
Subject: Re: ShopTalk: ReMax Longdrive Winner
> Charlie, am looking
Ed,
Can you give us more infothe specs of your driver.
I am using a SRV II with SK Fiber Lite Rev ( A flex ) and has been the best
driver yet.
Regards,
Charlie W.
- Original Message -
From: "Ed Boggess" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, Oc
Dan,
Was this what you saw?
"WOMEN's DIVISION:
Jo D Duncan - 2nd PLACE - SMT 455 Deep Bore "
Regards,
Charlie W.
- Original Message -
From: "Dan Neubecker" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, October 21, 2002 2:08 PM
Subject:
John,
Do you know what the ladies champ used?
Was it the SRV II or Bang 450?
Regards,
Charlie W.
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, October 21, 2002 11:44 AM
Subject: ShopTalk: ReMax Longdrive Winner
> The winner of the R
Thanks, I am back in business.
Charlie W.
- Original Message -
From:
James T.
Voorhies
To: [EMAIL PROTECTED]
Sent: Tuesday, October 15, 2002 11:21
AM
Subject: RE: ShopTalk: Block Sender
Option
Charlie,
In
Outlook got to Tools then Organize, then
To All,
Does anyone know how do you remove a name or
address from the " Block sender list " ?
Thanks,
Charlie W.
Same here, the junk just keeps coming...talked to
some computer guru's and nobody has an answer hot to stop it, very frustrating!
Charlie W.
- Original Message -
From:
Pat McGoldrick
To: [EMAIL PROTECTED]
Sent: Thursday, October 03, 2002 11:13
PM
Su
Dave,
No problem...thanks for responding.
Regards,
Charlie W.
- Original Message -
From: "Dave Tutelman" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 23, 2002 2:55 PM
Subject: Re: ShopTalk: 50" long Driver help
> Charlie,
> Sorr
Dave,
I have measured the 8.5 degrees MV2 and I got 54 mm.
The 10.5 head appears to be deeper. I will measure when I get a chance (
friend plays it and he will not part with it now, so I will have to measure
next time we play together ).
Regards,
Charlie W.
P.S.
Dave, I believe I answered your
.
Regards,
Charlie W.
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, September 12, 2002 8:51 AM
Subject: ShopTalk: TaylorMade R500
> Any clue on the tip diameter on the new R540 drivers? It wasn't in
> Arnies' Shaft Replacement Guide.
>
Thanks,
I see your response but I do not see my msg.
"Test only. Is the mail working or is only me?
Regards,
Charlie W."
- Original Message -
From: "Burgess Howell" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, September 11, 2002 12:0
Test only. Is the mail working or is only
me?
Regards,
Charlie W.
Ed,
Go to http://www.golfquip.com/ and look under current specials.
They are dumping it for $ 6.00 Cdn!!!
Is that any good?
Regards,
Charlie W.
Zero Tolerance Wedges
Cambered Sole For Added Shot Making Options CLOSEOUT SPECIAL - ONLY $6.00
PER HEAD!
Read a Review of the ZT Wedge
For players who
- Original Message -
From: "Charlie" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 09, 2002 10:13 AM
Subject: Re: ShopTalk: 50" long Driver help
> Bernie,
> The 2 MV2 were 10.5 and 8.5, the 10.5 was with the Penley ETA and i
that the shaft broke since it has a special 8 inch re
inforced boron tip.
Also, built a 9.5 degree Baltusrol (Inception ) with a GD shaft and if
anything I would say that it actually has draw tendencies and not fade.
Regards,
Charlie W.
P.S. I will measure the height on the MV 2, the 10.5 and 8.5 did
e for longer
shafts.
Regards,
Charlie W.
- Original Message -
From:
Bernie
Baymiller
To: Shoptalk
Sent: Saturday, September 07, 2002 7:41
PM
Subject: Re: ShopTalk: 50" long Driver
help
Pat,
Some thoughts:
That guy doesn't have the idea
Title: cobra tip dia.
John,
I know that the 350ss is .335, not sure of the
other but I would assume they are also .335.
Regards,
Charlie W.
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, September 04, 2002 10:59
AM
Subject
No problems in Ontario.
Regards,
Charlie W.
- Original Message -
From:
tflan
To: ShopTalk
Sent: Tuesday, September 03, 2002 10:03
PM
Subject: ShopTalk: UPS
Hi;
Is anyone having problems with UPS deliveries? 6
of my last 8 orders were delivered to the
It is not golf but occasionally we deviate to post something
different, I hope you enjoy it.
Regards,
Charlie W.>> April 21,
2002>> Sometimes it DOES take a Rocket Scientist! (true
story).>> Scientists at the Canadian Research Facility built a
gun> specifically to la
John,
Are you sure it available in LH ?
That must be new.
Regards,
Charlie
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 26, 2002 7:18 PM
Subject: RE: ShopTalk: SRVII Experiment
> Dale:
> I rep the entire Bang line at
Did not know they make a 3800CC ?
Is that new?
- Original Message -
From: "Duncan McKenzie" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 21, 2002 11:12 PM
Subject: ShopTalk: Woman's Driver
>
>
>
> A very popular driver for women has been the Alpha Response 380c
Jack,
Built many sets, in RH and LH. The option of 3 degrees flat or up is great
( LH only in std lie ) and not only these are nice looking they do not
require ferrules and performance is great.I would certainly recommend these
to anyone.
Regards,
Charlie W.
- Original Message -
From
aback
up but it is 9 degrees. Anyone else had any SRV II crack? I swing at 92 to
94 MPH so the speed should not be the cause.
Regards,
Charlie W.
- Original Message -
From: "ED" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, August 20, 2002 11:54 PM
Subj
Zach,
I will be testing the Baltusrol this week but no experience with Carnoustie
on the course.
Hit it into the net indoors and the Baltusrol seemed the easiest to hit.
Both very solid.
Can you please report on the MV2.
Thanks,
Charlie W
- Original Message -
From: "Zach&quo
spring and I am glad they
did..
Regards,
Charlie W.
- Original Message -
From: "Bernie Baymiller" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, August 01, 2002 8:28 PM
Subject: Re: ShopTalk: Bang SRV II
> Charlie,
>
> Good info on the Lite Rev A.
ways. Nice low boring
trajectory with good carry. The best driver I ever owned.
Regards,
Charlie
- Original Message -
From: "Bernie Baymiller" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, August 01, 2002 1:06 AM
Subject: Re: ShopTalk: Bang SRV II
> Ryan,
Jim,
I have had good service from Jason Gaston in Mt. Albert , Ontario.
416 518 3191
Regards,
Charlie W.
- Original Message -
From: "Jim Millar" <[EMAIL PROTECTED]>
To: "Shoptalk" <[EMAIL PROTECTED]>
Sent: Monday, July 29, 2002 10:45 PM
Subject: ShopTalk:
Thanks Kent
- Original Message -
From: "The Flaadas" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, July 24, 2002 4:11 PM
Subject: Re: ShopTalk: tall face
> Hi Charlie,
>
> SW- D-4 Weight 317 gr. 46" length
>
> Kent
>
&g
Kent,
What SW, total weight and length?
Thanks,
Charlie W.
- Original Message -
From: "The Flaadas" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, July 24, 2002 10:49 AM
Subject: Re: ShopTalk: tall face
> Dean,
>
> I don't know about SK
Dave,
I built a set for customer 6'9" with apache graphite shafts.
These are carbon copy of the new callaway bertha irons ( not bore through),
he loves it.
Regards,
Charlie W
- Original Message -
From: "David Rees" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]&g
Charlie,
Sorry, you are correct, I missed it.
Charlie W.
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, July 09, 2002 10:38
AM
Subject: Re: ShopTalk: Nicklaus Air Max
Driver Shaft
Charlie
266 grams is a reasonable
Mark,
Are you sure it was 266 grams or 9.39 oz?
What was the SW?
Regards,
Charlie W.
WEBWORKS
- Original Message -
From: "Mark Fields" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 09, 2002 10:05 AM
Subject: Re: ShopTalk: Nicklaus Air Max Dr
Jim,
Another way of getting rid off the sound is by
putting couple strips of lead tape on the sole of the head.
Regards,
Charlie W
- Original Message -
From:
Jim
Hastings
To: ShopTalk
Sent: Friday, June 21, 2002 9:41 PM
Subject: ShopTalk: Foam
I am planning on
40 matches
Mail list logo
