Alan,
I don't know if that is still the case. I based my conclusion --
which is the same as yours -- on the early version.
It's not a bad approximation. True, it ignores the fact that the
shaft is more flexible closer to the tip. But the flexibility
measured by an F-meter or NF-4 is a weighte
Dave or Tom,
Last time I saw that formula it was a simple conversion from frequency to
EI product assuming a uniform rod of the unclamped length that the
frequency was taken at. Is that still the case? If not, could one of you
send me the current version?
Thanks,
Alan Brooks
At 12:26 PM
In a message dated 6/4/09 5:34:14 A.M. Pacific Daylight Time,
andre_can...@videotron.ca writes:
BTW are you still selling prosoft inserts?
TKS.
Yes.
Arnie
**We found the real ‘Hotel California’ and the ‘Seinfeld’
diner. What will you find? Explore WhereItsAt.com.
(http://www.wherei
fit shafts with more confidence and surety of results.
TOM
-Original Message-
From: owner-shopt...@mail.msen.com [mailto:owner-shopt...@mail.msen.com] On
Behalf Of j...@clubmaker-online.com
Sent: Thursday, June 04, 2009 11:19 AM
To: ShopTalk@mail.msen.com
Subject: RE: ShopTalk: Flex Board
To
Tom:
Tell us a bit more about your Bend Profile software.
John
shoptalk
When Tom Mace left the industry to go back to the academic world at
Cal Poly SLO, I had him do a complete full out EI of multiples of
all my shaft designs and flexes so I would be able to compare the EI
curves to see their
At 11:49 AM 6/4/2009, Tom Wishon wrote:
When Tom Mace left the industry to go back to the academic world at
Cal Poly SLO, I had him do a complete full out EI of multiples of
all my shaft designs and flexes so I would be able to compare the EI
curves to see their relationship to our Bend Profile
y, June 04, 2009 9:00 AM
To: ShopTalk@mail.msen.com
Subject: Re: ShopTalk: Flex Board
At 10:10 AM 6/4/2009, john wrote:
Hi Dave,
Once upon a time I ran a frequency profile of a shaft and then ran
force/deflection profile of the same shaft just to see what I would get. I ran
the deflection (actu
Subject: Re: ShopTalk: Flex Board
I'd like to point out a few things about profiling here:
(1) A flex board IS a profiler. Inherently! Put a weight on the tip, let it
settle, and plot the deflection of the shaft at 5" (or 1" if you prefer)
intervals. That is the purest form of p
elman"
Sent: Thursday, June 04, 2009 8:27 AM
To: ShopTalk@mail.msen.com
Subject: Re: ShopTalk: Flex Board
I'd like to point out a few things about profiling here:
(1) A flex board IS a profiler. Inherently! Put a weight on the tip,
let it settle, and plot the deflection of the s
(the
Wishon/kaufman/Hoefling/PCS approach). The plots looked remarkably similar.
Cheers,
John K
From: "Dave Tutelman"
Sent: Thursday, June 04, 2009 8:27 AM
To: ShopTalk@mail.msen.com
Subject: Re: ShopTalk: Flex Board
I'd like to point o
ut then again they could also get a NF.
- Original Message -
From: <mailto:arniescl...@aol.com>arniescl...@aol.com
To: <mailto:ShopTalk@mail.msen.com>ShopTalk@mail.msen.com
Sent: Wednesday, June 03, 2009 4:22 PM
Subject: Re: ShopTalk: Flex Board
In a message dated 6/3/09 7:26
prosoft inserts?
TKS.
A
- Original Message -
From: arniescl...@aol.com
To: ShopTalk@mail.msen.com
Sent: Wednesday, June 03, 2009 4:22 PM
Subject: Re: ShopTalk: Flex Board
In a message dated 6/3/09 7:26:08 A.M. Pacific Daylight Time,
andre_can...@videotron.ca writes:
If you
In a message dated 6/3/09 7:26:08 A.M. Pacific Daylight Time,
andre_can...@videotron.ca writes:
If you could find a way to have the weight slide across the entire length
of
the board (you would need another clamp)
you could turn this thing into a profiler.
This is easy! Slip a piece of vin
If you could find a way to have the weight slide across the entire length of
the board (you would need another clamp)
you could turn this thing into a profiler.
A
- Original Message -
From: "Tom and Donna"
To:
Sent: Wednesday, June 03, 2009 9:15 AM
Subject: ShopTalk:
Let me repeat my earlier message to Arnie in reference to the info he
sent on the Flexboard. Since I could not find anyone with the charts
used on the Golfsmith Shaft Deflection Analyzer and visiting with the
parts department in the main store in Austin, I posted my need on
ShopTalk and Arnie
15 matches
Mail list logo