On Behalf Of Brad Smith
Sent: Saturday, December 13, 2008 11:41 AM
To: ShopTalk@mail.msen.com
Subject: Re: ShopTalk: PCS Equalizer
Andre,
In the link from Tim, one of the charts shows a flex value of 4.0
for a 38" iron at 289cpm. That value was for a freq meter that read
the same as the
I explain to them that they were fit to a custom frequency and it does
not align to a letter or number value.
I also explain to them that there are no standards in the golf
industry, and one company's R is another company's S and yet another
company's A flex.
This usually works - though not
.@mail.msen.com] On
Behalf Of Brad Smith
Sent: Saturday, December 13, 2008 11:41 AM
To: ShopTalk@mail.msen.com
Subject: Re: ShopTalk: PCS Equalizer
Andre,
In the link from Tim, one of the charts shows a flex value of 4.0 for a 38"
iron at 289cpm. That
value was for a freq meter that re
You can find a number of experts on the PCS Equalizer system in the
forums at the International Clubmakers Guild website at
www.clubmakersguild.com
These include Dave Eagar, the developer of the software. Any questions
you have about how the system was intended to help clubmakers "talk the
s
2:30 AM
Subject: ShopTalk: PCS Equalizer
I went to Tim Hewitt's site that Andre mentioned about the defunct
PCS's Equalizer software system. http://www.myostrichgolf.com/equalizer/
It made me curious. Can someone explain exactly how a clubmaker was
supposed to use this calibrati
For a proper calibration adjustment, would you not need to check the
calibration from a low cpm
value to a high value, not just a single point? HFS
_
From: owner-shopt...@mail.msen.com [mailto:owner-shopt...@mail.msen.com] On
Behalf Of André Cantin
Subject: Re: ShopTalk: PCS Equalizer
with the same data.
André.
From: Brad Smith
To: ShopTalk@mail.msen.com
Sent: Friday, December 12, 2008 12:30 AM
Subject: ShopTalk: PCS Equalizer
I went to Tim Hewitt's site that Andre mentioned about the defunct PCS's
Equalizer software system. http://www.myostri
Harry,
I do not know the cost at this time. I will let you know once that has been
established.
Tom Byers
- Original Message -
From: "Harry F. Schiestel" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, January 18, 2003 11:10 PM
Subject: RE: ShopTalk: PCS
Hi Tom > the $42 question > how many $'s? HarryS
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Tom Byers
Sent: Saturday, January 18, 2003 11:51 AM
To: [EMAIL PROTECTED]
Subject: ShopTalk: PCS Equalizer Flex System
This system was introd
This system was introduced by the PCS a couple of years back for members
only. The package included a shaft with a predetermined frequency to use a s
a calibration shaft that will allow you to make a correction change in the
software, so that you and I can build clubs that will be the same flex on
10 matches
Mail list logo
