Callee will send RTCP Receiver reports, to Caller, indicating quality of
reception, packet loss and interarrival jitter for packets received from
Caller.
Thanks and regards,
Abhinesh patil
Rancore Technologies(P) Ltd
-Original Message-
From: sip-implementors-boun...@lists.cs.columbia
hi if callee set as recv only, why the RTCP flow will happen from callee to
caller?
and one more doubt, if caller set attribute as sendonly, is it mandatory to
send RTP packets from caller to callee or optional?
Please advice me
Thanks & Regards,
vijay
From: Shanbhag, Somesh (NSN - IN/Ban
"Therefore, it is
RECOMMENDED that a UA only render the information in the Call-Info
header field if it can verify the authenticity of the element that
originated the header field and trusts that element. This need not
be the peer UA; a proxy can insert this header field into requests.
Thanks for the document.
In that document says, only proxy can insert the call-info header.
could you please tell me, B2BUA can insert this header?
Thanks & Regards,
vijay
--- On Mon, 6/7/09, Iñaki Baz Castillo wrote:
From: Iñaki Baz Castillo
Subject: Re: [Sip-implementors] Info of I
Yes, the RTP flow shall be from caller to callee. You can prefer to play some
music/announcements while on hold to callee.
The RTCP report shall be from callee to caller, with which caller can adjust
some parameters in RTP accordingly.
Somesh
From: ext friend
Hi if caller set the attribute as sendonly, obviously callee set the attribute
as recvonly in 200 OK.
now my doubt is, if the caller set sendonly, is the RTP will flow from caller
to callee?
callee will not send anything bcoz callee set as recv only.
i have a doubt in caller side.
please
friend friend wrote:
> Dear somesh,
> In hold condition, i set the media ip address as 0 and i set the
> attribute as send only.
> is this enough? am not setting the port as 0.
>
> and could you please tell me, when shall i use Inactive and send only
>
> please advice me.
please rea
Refer to section 8.4 of rfc 3264 for details on media attributes to be set when
placing a call on hold...
-Original Message-
From: sip-implementors-boun...@lists.cs.columbia.edu
[mailto:sip-implementors-boun...@lists.cs.columbia.edu] On Behalf Of ext friend
friend
Sent: Monday, July 06
Yeah .. what I meant was ip address to be zero ( not the port ). Setting the ip
address as zero is not a standard solution but still you can still find it is
used widely. By setting the ip address to zero, bascially you will not be
getting the RTCP packets from the phoneB. Going by the philosoph
2009/7/6 friend friend :
> Could you please advice me, when should i use the call-info?
http://tools.ietf.org/html/rfc3261#section-20.9
--
Iñaki Baz Castillo
___
Sip-implementors mailing list
Sip-implementors@lists.cs.columbia.edu
https://lists.cs
Dear somesh,
In hold condition, i set the media ip address as 0 and i set the
attribute as send only.
is this enough? am not setting the port as 0.
and could you please tell me, when shall i use Inactive and send only
please advice me.
Thanks & Regards,
vijay
--- On Fri, 3/7/09, Sh
Could you please advice me, when should i use the call-info?
Thanks & Regards,
vijay
--- On Fri, 3/7/09, Iñaki Baz Castillo wrote:
From: Iñaki Baz Castillo
Subject: Re: [Sip-implementors] Info of INVITE
To: "friend friend"
Cc: sip-implementors@lists.cs.columbia.edu
Date: Friday, 3 July, 2
12 matches
Mail list logo