[EMAIL PROTECTED] wrote:
>From: <[EMAIL PROTECTED]>
>
>I want to connect to a useragent i.e, put him on hold from my
>application. The useragent is not on any call initially .For this iam
>creating an invite request and sending it to the useragent as below:
>
> Not to take away
From: <[EMAIL PROTECTED]>
I want to connect to a useragent i.e, put him on hold from my
application. The useragent is not on any call initially .For this iam
creating an invite request and sending it to the useragent as below:
Not to take away from anything Paul K. said, but my opinio
AIL PROTECTED]:12000 SIP/2.0
>>> From:
>> ;tag=10773021540708372_local.1210137313755_22_1
>> 9
>>> To:
>>> Call-ID: [EMAIL PROTECTED]
>>> Max-Forwards: 70
>>> CSeq: 2 INVITE
>>> Content-Type: application/sdp
>>> Content-Length: 171
&g
P4 10.238.115.216
> > s=-
> > c=IN IP4 0.0.0.0
> > t=0 0
> > a=sendonly
> >
> >
> >
> >
> > am I correct in my understanding?
> >
> > Thanks & Regards
> > Rajeswari.R
> >
> >
> > -Original Message-
&g
.edu
Subject: Re: [Sip-implementors] REG: call hold
This is replying gto several messages in this thread:
First, what the original post showed seems entirely fine to me, though
it may not be "preferred". While there may be phones that will respond
poorly to this, they are *broken* and s
> Content-Length: 171
>
> v=0
> o=user 0 0 IN IP4 10.238.115.216
> s=-
> c=IN IP4 0.0.0.0
> t=0 0
> a=sendonly
>
>
>
>
> am I correct in my understanding?
>
> Thanks & Regards
> Rajeswari.R
>
>
> -----Original Message-----
>
>
> From: Mahipati Deshpande [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, May 07, 2008 10:50 AM
> To: Routhu, Rajeswari (Cognizant);
> Sip-implementors@lists.cs.columbia.edu
> Subject: Re: [Sip-implementors] REG: call hold
>
>
>
&g
=sendonly
am I correct in my understanding?
Thanks & Regards
Rajeswari.R
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 07, 2008 1:39 PM
To: Routhu, Rajeswari (Cognizant)
Subject: RE: [Sip-implementors] REG: call hold
Depends if it is a
ednesday, 7 May, 2008 11:10:47 AM
Subject: RE: [Sip-implementors] REG: call hold
Hi
To put a call on hold first it needs to be established if they is no
communication btw two peers
Then what is the need to put them on hold ?
-Regards Ramya
Fro
May 07, 200810:53 AM
To:[EMAIL PROTECTED]; [EMAIL PROTECTED];Sip-implementors@lists.cs.columbia.edu
Subject: Re: [Sip-implementors]REG: call hold
Its not mandatory that you need to offer with "sendrecv" in
initial INVITE.
Regards,
Mahipati Deshpande
- Original Message -
SessionDescription.
Thanks & Regards
Rajeswari.R
From: Mahipati Deshpande [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 07, 2008 10:50 AM
To: Routhu, Rajeswari (Cognizant);
Sip-implementors@lists.cs.columbia.edu
Subject: Re: [Sip-implementors] REG: call hold
yes,
]; [EMAIL PROTECTED];
Sip-implementors@lists.cs.columbia.edu
Subject: Re: [Sip-implementors] REG: call hold
Its not mandatory that you need to offer with "sendrecv" in initial INVITE.
Regards,
Mahipati Deshpande
- Original Message
From: "[EMAIL PROTECTED]" &l
08 10:41:55 AM
Subject: Re: [Sip-implementors] REG: call hold
Hi Ramya,
I got you. You mean first I should establish a call with the useagent from the
application. Then I need to send the re-invite to the useragent with a =send
only .Its just not sending the invite, but also reinvite.Am
t); Sip-implementors@lists.cs.columbia.edu
Subject: Re: [Sip-implementors] REG: call hold
Some phone does not support offer with hold. You should be prepared to handle
this kind of scenario. You may try adding "a=sendonly" in your initial offer.
This works with few phones.
Regards,
Mahipati Des
sage-
From: Ramya Jothi [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 07, 2008 10:25 AM
To: Routhu, Rajeswari (Cognizant); Sip-implementors@lists.cs.columbia.edu
Subject: RE: [Sip-implementors] REG: call hold
Hi Rajeswari
First the call needs to be established
Only then u can put it on
ilto:[EMAIL PROTECTED]
Sent: Wednesday, May 07, 2008 10:25 AM
To: Routhu, Rajeswari (Cognizant);
Sip-implementors@lists.cs.columbia.edu
Subject: RE: [Sip-implementors] REG: call hold
Hi Rajeswari
First the call needs to be established
Only then u can put it on hold
INVITE a = sendre
Wednesday, May 07, 2008 10:10 AM
To: Sip-implementors@lists.cs.columbia.edu
Subject: [Sip-implementors] REG: call hold
Hi all,
I want to connect to a useragent i.e, put him on hold from my
application. The useragent is not on any call initially .For this iam
creating an invite request and
ject: Re: [Sip-implementors] REG: call hold
Some phone does not support offer with hold. You should be prepared to handle
this kind of scenario. You may try adding "a=sendonly" in your initial offer.
This works with few phones.
Regards,
Mahipati Deshpande
- Original Message
t;[EMAIL PROTECTED]>
To: Sip-implementors@lists.cs.columbia.edu
Sent: Wednesday, 7 May, 2008 10:10:21 AM
Subject: [Sip-implementors] REG: call hold
Hi all,
I want to connect to a useragent i.e, put him on hold from my
application. The useragent is not on any call initially .For this iam
crea
Hi all,
I want to connect to a useragent i.e, put him on hold from my
application. The useragent is not on any call initially .For this iam
creating an invite request and sending it to the useragent as below:
INVITE sip:[EMAIL PROTECTED]:12000 SIP/2.0
From:
;tag=42215289471803874_local
20 matches
Mail list logo