plementors@lists.cs.columbia.edu
Subject: RE: [Sip-implementors] SIP client registers from multiple
locationsand all location are behind the NAT
I clarify the same,
UA1 NAT1
REGISTRAR
REG1->
src ip: 10.0.
Vivek,
I think the issue you talked about is how to identify which REGISTER the
200(register) responds to,
I think RFC3261 sec 17.1.3 Matching Responses to Client Transactions has
already given the solution.
Another question is if you give REGISTRA the internal ip addr, how would
you expect t
option!!
Best Regards,
Vivek Batra
-Original Message-
From: Rockson Li (zhengyli) [mailto:[EMAIL PROTECTED]
Sent: Friday, June 27, 2008 9:14 AM
To: Scott Lawrence; Vivek Batra; sip-implementors@lists.cs.columbia.edu
Subject: RE: [Sip-implementors] SIP client registers from multipl
ckson Li (zhengyli) [mailto:[EMAIL PROTECTED]
Sent: Friday, June 27, 2008 9:14 AM
To: Scott Lawrence; Vivek Batra; sip-implementors@lists.cs.columbia.edu
Subject: RE: [Sip-implementors] SIP client registers from multiple
locationsand all location are behind the NAT
Comments inline.
-Rockso
ECTED]
Sent: Friday, June 27, 2008 9:14 AM
To: Scott Lawrence; Vivek Batra; sip-implementors@lists.cs.columbia.edu
Subject: RE: [Sip-implementors] SIP client registers from multiple
locationsand all location are behind the NAT
Comments inline.
-Rockson
-Original Message-
From: [
locationsand all location are behind the NAT
On Thu, 2008-06-26 at 15:29 +0530, Vivek Batra wrote:
> Please consider the following:
> * SIP client send the REGISTER message to Registrar server from
> multiple locations. Q-value is not send by SIP client in its REGISTER