Re: [sipx-users] phones/gateways do not restart via sipxecs

2008-10-20 Thread IT Services
Thanks for the tip. But even the managed phones (lg Nortel 6812, snom 320) do not restart after I issue the 'send profiles' commands. Any thoughts? tommy -Original Message- From: Tony Graziano [mailto:[EMAIL PROTECTED] Sent: Monday, October 20, 2008 4:26 PM To: IT Services; sipx-users@

[sipx-users] Hunt Group Configuration Problem

2008-10-20 Thread Tony Graziano
I have a hunt group that works properly in all ways but one (3.10.2): I have a siptrunk that rings to a user DID. The user does not have a phone enabled, and has a schedule attached to it. The schedule sends the calls to a hunt group during the day, and an AA all other times. My issue is that I

Re: [sipx-users] phones/gateways do not restart via sipxecs

2008-10-20 Thread Tony Graziano
I think the gateway is treated somewhat like a phone. It needs to have a tftp server enabled, as an example, which needs to be the sipx server. Think of it as a managed phone in that regard. So you'll need to look at your documentation from the gateway mfr. >>> "IT Services" <[EMAIL PROTECTED]> 1

Re: [sipx-users] Having problems connecting to AudioCodes MP-118

2008-10-20 Thread Tony Graziano
Connect to the AC webui, and pull up the log. Does it actually receive the message. If so, you are probably looking at a misconfiguration of the gateway. The log should help you see what is going on though. >>> "IT Services" <[EMAIL PROTECTED]> 10/20/08 17:20 PM >>> Hi there: I followed the wiki

[sipx-users] phones/gateways do not restart via sipxecs

2008-10-20 Thread IT Services
Hi there: I notice that when I issue a 'Send Profile' command, the phone units (and gateways) do not receive the 'restart' command from sipxecs. In the 'Job Status' section, it says that the restart command was issued successfully, however. Any help is appreciated. Thanks! tommy Notice of Con

[sipx-users] Having problems connecting to AudioCodes MP-118

2008-10-20 Thread IT Services
Hi there: I followed the wiki to set up a MP-118 FXO but it's not working. I created the gateway in sipxecs and assigned a static IP to the audiocodes box. I uploaded the .cpm and .ini files successfully. When I make a call, I eventually get a fast busy signal. In the logs, it does show sipx ass