On Sun, 2010-05-02 at 07:03 -0400, Justin Menga wrote:
> Just thought I'd give an update as I ran into this issue yet
> again and it stumped me for a little bit.
>
> The fix is simple - in my case my voice gateway was sending
> INVITE with the To header in the format of
> @ - by default,
> SIPXec
You may have certain type of call sequences that might give you problems
using IP on the gateway. You should determine how to properly configure your
gateway to use the sipdomain/srv records instead of an IP address.
On Sun, May 2, 2010 at 7:03 AM, Justin Menga wrote:
>
> Content-Type: text/plai
Content-Type: text/plain;
charset="utf-8"
Content-Transfer-Encoding: 8bit
Organization: SipXecs Forum
In-Reply-To: <9cc99a440912291623l2b34c1fcr63abc8e30312e...@mail.gmail.com>
X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <45944>
Message-ID:
Just thought I'd give an update as I ran into this
Hi
OK - my system is just a testing/prototyping system in a consumer Telco
environment for delivering voice services to a bunch of test consumers using
Residential Gateways - not your typical SIPXecs usage.
As such, we don't use the concept of internal extensions and when creating a
user identity
On Wed, 2009-12-30 at 17:32 +1300, Justin Menga wrote:
> Hi
>
> The From address is the format
> @ - for example,
> <0275779...@210.55.232.170> - this of course does not match a locally
> configured user identity on SIPXecs as the calling party number will
> always be a PSTN number.
>
> Note that
Hi
The From address is the format @ -
for example, <0275779...@210.55.232.170> - this of course does not match a
locally configured user identity on SIPXecs as the calling party number will
always be a PSTN number.
Note that I can get this going without authentication if I use a SIP Trunk
instead
On Wed, 2009-12-30 at 13:23 +1300, Justin Menga wrote:
> Hi
>
> I'm using SIPXecs 4.0.2 and trying to get it to connect to a Cisco
> 2821 PSTN Gateway.
>
> I can make outgoing calls no problem, however SIPXecs sends back a 407
> Proxy Auth Required response for incoming calls from the PSTN gatewa
Hi
I'm using SIPXecs 4.0.2 and trying to get it to connect to a Cisco 2821 PSTN
Gateway.
I can make outgoing calls no problem, however SIPXecs sends back a 407 Proxy
Auth Required response for incoming calls from the PSTN gateway. Is there
anyway to disable this - i.e. accept unauthenticated INV
